Stuck on blinking cursor on reboot

Discussion in 'UDOO NEO' started by Julien, Nov 8, 2015.

  1. Julien

    Julien New Member

    Joined:
    Nov 8, 2015
    Messages:
    21
    Likes Received:
    9
    When I click on Power > Reboot, the screen only displays a blinking white cursor and won't reboot unless I manually unplug and replug the power source (USB cord). I've tried waiting for more than 2 minutes, but it's not doing anything, the "busy" red LED isn't even lit.
     
  2. Reallife

    Reallife New Member

    Joined:
    Nov 1, 2013
    Messages:
    8
    Likes Received:
    1
    Confirmed.
    A "reboot" on UDOObuntu wont reboot the device.
     
  3. Marco Schiff

    Marco Schiff New Member

    Joined:
    Nov 5, 2015
    Messages:
    20
    Likes Received:
    3
    The same for me


    Inviato dal mio iPhone utilizzando Tapatalk
     
  4. Mike Paxton

    Mike Paxton New Member

    Joined:
    Nov 7, 2015
    Messages:
    3
    Likes Received:
    1
    I've noticed the same issue. What it appears to be is hanging while the reboot sequence terminates ALL processes, it fails while doing so. I've connected to the Neo using a serial connection and an upon reboot the system hangs at the following message indefinitely.
    ......
    Stopping uim-sysfs daemon.
    * Asking all remaining processes to terminate... [ OK ]
    * Killing all remaining processes... [fail]

    The only way to get past this is by pressing the reset button on the Neo or unplugging it from power I've not yet checked into the exact meaning of the error but maybe someone else here knows what is going on?
     
  5. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
    Hi guys,
    thanks for this feedback: it's a known issue, you'll have it fixed soon.
     
    Marco Schiff likes this.

Share This Page