Is there any camera support udoo-neo board?

Discussion in 'UDOO NEO' started by Jordon Wu, Feb 28, 2016.

  1. Jordon Wu

    Jordon Wu New Member

    Joined:
    Feb 28, 2016
    Messages:
    2
    Likes Received:
    1
    Hi all,
    Is there any camera module support udoo-neoboard?
    And is udoo shop provide any camera accessory to support udoo-neo board?
     
    Jordon Wu, Feb 28, 2016
    #1
  2. graugans

    graugans Administrator Staff Member

    Joined:
    Sep 17, 2015
    Messages:
    328
    Likes Received:
    141
    As far as I know there is no official camera in the shop. The only option I see for adding a camera is either by USB or by a custom design using connector J6 and a parallel 8-Bit camera. Not the CSI ones used in the Quad. Maybe @Andrea Rovai has another option.
     
    graugans, Feb 29, 2016
    #2
  3. jas-mx

    jas-mx Active Member

    Joined:
    Dec 31, 2013
    Messages:
    407
    Likes Received:
    118
    You can attach a analogue (NTSC/PAL) camera as per my post.
     
    jas-mx, Feb 29, 2016
    #3
    Andrea Rovai and graugans like this.
  4. graugans

    graugans Administrator Staff Member

    Joined:
    Sep 17, 2015
    Messages:
    328
    Likes Received:
    141
    you can give the arducam a try. It is the same imager like the UDOO Quad/Dual Camera but provides parallel output
     
    graugans, Feb 29, 2016
    #4
    Andrea Rovai likes this.
  5. Jordon Wu

    Jordon Wu New Member

    Joined:
    Feb 28, 2016
    Messages:
    2
    Likes Received:
    1
    Thanks, I will try this later
     
    Jordon Wu, Feb 29, 2016
    #5
    Andrea Rovai likes this.

Share This Page