Power from pins

hi

I need to power the Udoo x86 plus from the head pins and be able to use and power the wifi and ssd , all from the pins


Please help

 

Why? What is wrong with using the standard 12V connector? I don't believe it is possible to power it through another way.

 

For an application that I'm working with the barrel connector cannot be used

On the header pin there is a Vin pin can this be used?

 

No, it is an Arduino pin and I even doubt it would work for the Arduino. It definitely is no 12V. Edit: it is 12V.

 

Looks like you can.

 

If you can read electrical schemes, you can download them for the udoo here https://www.udoo.org/docs-x86/Hardware_Reference/Resources.html

I still think you cannot power the complete Udoo X86 through the Vin pin on the Arduino side (but I am not an electronic engineer).

 

The GPIO pin is the same as the barrel connector. It is a smaller diameter pin and may not handle the current.

 

Oh, I can read schematics.I am an electronics technician.