Just for my understanding, where should one go to try and get help for this type of thing ? I appreciate the fact the Seco offers this as a...
On the UDOO Quad board, there was a way to add support for additional UARTs (by changing some board specific defines) : UART3 /dev/ttymxc2 pin 47...
I managed to get it working by doing the following : Take the a62_q_udoobuntu2.img from the site and write to an SD Card Boot the A62 board with...
I also tried - copying the /boot/* content from the fat partition from the sd card into the /boot folder on the root partition on the eMMC. -...
Any tips on how to get the Quad image on the eMMC would be great ? The current image doesn't fit (eMMC storage is 3959MB and the image is >4GB)
I've created a backup of the original eMMC so now I can indeed always restore it after booting from an SD. I already had to do it a couple of...
What exaclty is the issue with the bsp from the download page ? Wrote it to an SD and noticed that it booted correctly in the UI.
Yeah would be nice if they could provide that. My contact at Seco always points me back to this community. I understand they cannot give support...
Thanks a lot for the info ... I'll take a look at it .... not familiar with the github project or the SPI-NOR flash approach. For now I've done...
Hi, Is there a guide somewhere on how to get the A62 board up and running with an OS (preferably udoobuntu from...
Can somebody give a pointer to this guide ? I didn't find anything in the manual (Besides the fact that JP27 controls booting from internal eMMC...
Hi, From time to time we're seeing issues with SD cards that somehow get corrupted, resulting in an UDOO that refuses to boot. Sometimes, the...
Separate names with a comma.
