You should be able to hookup a bidrectional logic level converter between your custom board and X86 something like a TXB0108. The only issue would...
Have you tried setting: analogWriteResolution(16)
I think SECO manufactured the udoo neo however they specify a minimum order quantity for a custom design so it might be out of your price range if...
The problem isn't the GPU or video drive instead its the software stack as most of the time it will resort to software rendering hence the high...
You can use a usb adapter either ttl or full rs232 depending on your needs.
[MEDIA] After a couple of weeks of effort I finally got NCS working on a UDOO Neo, more info on my blog post if of interest.
You can change the resolution however it's a bit more involved, if you search the posts there should be a an old thread discussing the issue.
xrandr would never work you need need to alter the lcd hdmi settings in the dts file to change resolutions.
I don't think there are any easy options for screen or camera. For 3.2"-5" TFT the options are: 1. Finding a LVDS screen and implementation a...
If your not using UART5 (or the pins) on the M4 side then you can reallocate it to the A9 side, however I'm not sure if this is possible through...
There is little reason to access gipo through manipulating the registers yourself as that is the feature of the existing kernel driver. From LKM...
You can review the kernel driver code to understand how control a gpio pin. However beware this may not be possible from user space as direct...
There is no DAC on the imx6sx so its not possible without an external IC (something like MCP4725) attached to the M4 via I2C or SPI. The other...
You can try RPI see this link .
Separate names with a comma.
