@ajs It might, but I just never had time to check myself. If you happen to check it out yourself, please report here...
WoL works just fine here, Ubuntu 20.04 & UEFI BIOS 1.08. I had to force it enabled with systemd though;...
Yes, it installs and works good, unless IOMMU is enabled in BIOS.
Wow, awesome work!
Cool, thanks for your insight, I see that pull-down may need a rather small resistance for time-sensitive stuff... I will actually try inserting...
Well, to me it seams that there is significant difference between what it is designed for and what it ended up to be. According to the...
"Standard supplied Udoo Bolt fans" are at least two different COFAN fans, and they are both 5V fans, not 12V. And yes, we had tried, stock fans...
OK Bolters, I finally had time to scope the CN7 "PWM" signal and got some disappointing, yet interesting results that explain why various fans...
just check what's at https://udoo.org/download/files/UDOO_BOLT/UEFI_update/
tried *poweroff* command?
@DJVT Just use more recent kernel and you will be able to access ivi sensors; root@bolt:~# lsb_release -i -r Distributor ID: Ubuntu Release:...
Yes there is, it's in that zip, and it is quite comprehensive comparing to what you get from usual PC vendors (which is mostly none). It won't...
I've actually tried that, and it didn't work with COFAN stock fans. Haven't tried the Noctua though, if you have any success please share. But be...
OK, I'll try to borrow some simple scope this week and probe that CN7 pin2, under various BIOS settings... @oodarioo same BIOS/controller/board...
Just double checked, my NF-A6x25 5V PWM does not spin when I connect only Arduino +5V (top connector @ MB, pin 40) and GND. Noctua only start to...
Separate names with a comma.
