Richard, I was able to get the serial console redirection working in UEFI which was my main goal to aid me in developing for my Day Job during...
Thanks for posting this information. I don't yet have anything to offer from an advice perspective; but your "senerio two" option looks promising...
The Udoo owners would need to confirm... and/or you'd want to confirm the exact needs. The N3710 cpu claims to support Intel® Virtualization...
This thread is about using 80mm M2.SSDs with the 60mm M2 specified Udoo x86. It is not appropriate to discuss "cases" for the Quad in this thread.
Unlikely to help anyone; but Shapeways is doing a CyberMonday 10% off everything sale with Free shipping but the kicker is it has to be on orders...
NerdOfEpic, I apologize for my late response. I got my Polycarbonate screws #4-40 from McMaster.com... as I got them years ago for a case mod I...
Interested in feedback on the bracket when you get it. I know the hole to the bracket doesn't have a thread; because you can't 3D print a fine...
Correct.
0.6 inches or 15.24mm No; The M.2 connector provides all the grounding need. I didn't read every word on the wiki page for M.2; but would be...
Very much disagree. The issue of PCIe vs SATA is about having multiple transactions in flight at the same time; not about the speed of the CPU....
Not sure but I think the drive has to be an SATA SSD. I wasn't able to find any drives that were PCIe compliant that were not NVMe drives. In my...
All, Just wanted you to know that I have gotten my Udoo X86 to boot Windows 10 on an 256GB 80mm Transcend MTS800 SSD. I 3D printed a 60mm to 80mm...
Separate names with a comma.
