udoo neo not booting

Discussion in 'UDOO NEO' started by Noel Georgi, Mar 10, 2016.

  1. Noel Georgi

    Noel Georgi New Member

    Joined:
    Jan 13, 2016
    Messages:
    12
    Likes Received:
    1
    My udoo neo is not booting all of a sudden, sometimes i can ssh into the server but it gets stuck after typing in a command, sometimes it does not even boot. This is the serial boot info i got:

    => reset
    resetting ...

    U-Boot SPL 2015.04-00267-gd781468 (Dec 16 2015 - 14:44:56)
    Setting 1024MB RAM calibration data
    port 1


    U-Boot 2015.04-00267-gd781468 (Dec 16 2015 - 14:44:56)

    CPU: Freescale i.MX6SX rev1.2 at 792 MHz
    CPU: Temperature 59 C
    Reset cause: WDOG
    Board: UDOO Neo Full
    I2C: ready
    DRAM: 1 GiB
    PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
    MMC: FSL_SDHC: 0, FSL_SDHC: 1
    *** Warning - bad CRC, using default environment

    In: serial
    Out: serial
    Err: serial
    Net: CPU Net Initialization Failed
    No ethernet found.
    Normal Boot
    Hit any key to stop autoboot: 0
    =>

    any help appreciated

    the full boot dump is attached
     

    Attached Files:

    Last edited: Mar 10, 2016
    Noel Georgi, Mar 10, 2016
    #1
  2. Noel Georgi

    Noel Georgi New Member

    Joined:
    Jan 13, 2016
    Messages:
    12
    Likes Received:
    1
    this is the boot dump with another sd card
     

    Attached Files:

    Noel Georgi, Mar 10, 2016
    #2
  3. Noel Georgi

    Noel Georgi New Member

    Joined:
    Jan 13, 2016
    Messages:
    12
    Likes Received:
    1
    this is the boot dump when udoo neo boots, but gets stuck after typing in password
     

    Attached Files:

    Noel Georgi, Mar 10, 2016
    #3
  4. Andrea Rovai

    Andrea Rovai Well-Known Member

    Joined:
    Oct 27, 2014
    Messages:
    1,703
    Likes Received:
    240
    Andrea Rovai, Mar 11, 2016
    #4

Share This Page