Android 6 Beta 2 Udoo Quad

Hi , first thanks for update.

So .... write the img to sd with dd method.
I try it on tv - HDMI

1. Reboot loop , i see just Udoo logo.
2.Take out the hdmi - just wait few seconds connect again and now can see android logo.
3. Ask me for a passord ** To start android , enter your passord**. i try it 1234 and 0000
4.'' Decryption unsuccessful'' '' the password you entred is correct, but unfortunately your data is corupt.

I have just Resset tablet option

I try it with 2 different sd card.

Any solution?

Update: i dowloaded again and now start , but stil have problem with reboot loop.
I did not changed anything. The board trying to start on 1280x720 even my tv have 1080p.
Efter i deconnect and connect again HDMI cable the resolution is changing to 1080p.

 

And now, is there anything that doesn't work at all as expected?

 

Yes , reboot loop. Is not a solution to disconnect and connect HDMI cable on every start up.

And when we have a option to change resolution?

 

We had noticed this problem too, but we haven't understand yet the source of the problem. Sometimes there's this reboot loop, sometimes there is not. Is someone else encountering this behaviour?

 

The reboot problem is present from begenning . I just make a trick to go over. Disconnect and connect HDMI cable don't solve the reboot problem , just let me to jump over this problem. Efter restart reboot again.

In my opinion is something wrong with resolution.

 

Me too.I have similar problem in Android 6 beta 1 and 2 (UDOO Dual). In HDMI mode,when i push reset button then it always shown reboot loop.Sometimes i release the SD card for 15 minutes,it works again.But its okay in LVDS 15.Could you give some method to fix this?
Also,i can't boot Android 6 (beta 1 and 2) in LVDS 7,is there any patch for this problem?
Thank you.

 

@Andrea do you have an answer / solution? or you just notice and wee have to wait few mounts?
Sorry but if your support for x86 will be the same ....

 

I've just compiled android and I have the same problem with HDMI bootloop.
Someone else reported the same problem here: http://www.udoo.org/forum/threads/udoo-dual-android-hdmi-reboot-loop.4305/

edit: Hope this could be useful, here is my log: http://pastebin.com/raw/bAwcEzRt
At 58.979601, after 55.083850, I plugged the HDMI cable.

 

Hi guys,
hope you have re-downloaded the new image from the official download page (you may have not noticed but last week we re-uploaded a new image) In the new image the bootloop bug is fixed. Thanks for pointing it out!