Re: High CPU Load I submitted a pull request with the change incorporated. If anyone is curious, here are the steps: git clone https://github.com/UDOOboard/Kernel_Unico.git cd Kernel_Unico git remote add imx6-dongle https://github.com/imx6-dongle/linux-imx.git git fetch imx6-dongle git cherry-pick b8a4b014ead3840271b00948b4970051b13e4ff2 Then build the kernel as described in http://udoo.org/download/files/Document ... 0_2013.pdf root@imx6-qsdl:/lib/modules/3.0.35-gdfb7761-dirty# w 18:45:58 up 2:15, 1 user, load average: 0.49, 0.40, 0.42 USER TTY FROM LOGIN@ IDLE JCPU PCPU WHAT ubuntu pts/0 192.168.1.213 16:31 0.00s 0.38s 0.26s sshd: ubuntu Load average is way down and the system seems a little more responsive now too
Re: High CPU Load Sure, https://dl.dropboxusercontent.com/u/863 ... -dirty.tgz To install it, here are the steps: 1) tar -xzf udoo-quad-3.0.35-gdfb7761-dirty.tgz --- warning, creates a dir called 'udoo' 2) cd udoo 3) sudo cp /boot/uImage /boot/uImage-old 4) sudo cp uImage /boot 5) sudo cp -a lib/modules/3.0.35-gdfb7761-dirty /lib/modules 6) shutdown -r now This kernel is the default udoo config. At least on my board, the sata port does not seem to show the disk ( there is one ). I have not had time to debug it
Re: High CPU Load Thanks! The load is resolved... Now I need to dive into the overall slowness of the linaro :-D
Re: High CPU Load yep confirmed, that was a much simpler way of applying the fix and its working well on my board
Re: High CPU Load Hi Taillo Technically, that patch should be safe for the udoo dual. Would be nice if you could post any feedback on that cheers
Re: High CPU Load As I see from the feedbacks, the patch works fine so it will be added to the next releases!
Re: High CPU Load Yes, no issues at all with this patch - many happy UDOO'ers in IRC have applied this.
