I HAVE THIS PROBLEM WITH UBUNTU, WHEN I TURN ON THE UDOO BOARD, ONLY APPEARS THE SCREEN WHICH I ATTACHED IN THIS TEXT (THE IMAGE), AND FINALLY THE SCREEN BECOME BLACK AND THE HDMI SAYS THAT THERE IS NO SIGNAL, SOMEBODY CAN TELL WHAT HAPPEN
Hi Rafael, first: avoid using only capital letters. Second: have you followed the guide for what concerns LVDS?
I believe you have an Udoo Quad. Can try to rewrite a fresh downloaded Udoobunto 2 image on your SD card. Even better on another (new?) SD card. Bad downloaded or bad written images are the most common issues in not starting Udoobuntu. And do you have also a separate Udoo LVDS (touch) screen? Did you follow the instructions http://www.udoo.org/docs/Hardware_&_Accessories/UDOO_LVDS_Panels.html
Yes I follow the instructions but when I type sudo udooscreenctl set lvds15 Appears me a message that the command doesn't exit
Dou you have an Udoo LVDS screen connected or an HDMI monitor? If you connect your Udoo to a network can you open the web config panel after you have started your Udoo? http://www.udoo.org/docs/Basic_Setup/Web_Control_Panel.html
Sorry i tried with another sd card and the Vnc but nothing works do you think that I could be my udoo board?in the case that my udoo board doesn't work can I ge tenical support ?
I think you have another problem. The command should be available in Udoobuntu 2. If you have an hardware problem it won't boot at all. Can you connect your Udoo to your network with a network cable? Boot the Udoo without a monitor attached. Can you open the web control panel of the Udoo from another PC (http://IP-of-your-Udoo)?
