I'm running Ubuntu Server 16.04 on my Udoo x86 and am trying to program the 101 from the command line. I'm following Arduino's guidance here -> https://github.com/arduino/Arduino/blob/master/build/shared/manpage.adoc ... however, running in to "Flashing is taking longer than expected. Try pressing MASTER_RESET button" issues during upload. I installed the board packages with "arduino --install-boards Intel:arc32" ... and am uploading with this command -> arduino --board Intel:arc32:arduino_101 --port /dev/ttyACM0 --upload MyProgram.ino ... but am unable to get the upload to succeed. Anyone have success with this? I've applied the 101 udev rules as well.
Try to push the arduino reset switch on the udoo when that message pops up. It's the button on top near the leds. The other issue is with linux not uploading the sketch. https://www.udoo.org/docs-x86/Arduino_101_(Intel_Curie)/Getting_Started_with_Arduino_101.html Under Upload Procedure
Have tried pushing the reset switch ... to no avail. I'm using Arduino 1.8.3 and have applied the udev rules per the script. Code: Uploading... Starting download script... Flashing is taking longer than expected Try pressing MASTER_RESET button ERROR: Timed out waiting for Arduino 101 on /dev/ttyACM0 An error occurred while uploading the sketch
the udev rules script has changed from location in 1.8.3: https://forum.arduino.cc/index.php?topic=481998.0 Did you run the correct script?
Hi Chaps I'm suffering the same issue, managed to upload my sketch once. But other than that its failed all afternoon with the same issue: https://asciinema.org/a/EmvBzShFw5ke74jLOuvC7RRpw
For me it works. But I had uploading issues first (through graphic IDE) So perhaps you could try the procedure I mentioned here: upload to curie/arduino 101 doesn't work !
Mine ended up working, for now at least, although i'm not sure how. It put itself into a reset right after boot after a currie bios tweak and the next time I powered up it started writing to it again. I'm not sure if that forced a flush or something, but its working for now. I also thought the master reset button just restarted the arduino but I get an OS reboot, so not sure whats going on there either.
If you switched on the Curie/Braswell Power Management then you could get strange results. Also putting Pin 9 Low in a sketch could get strange result. I also quote the latest kickstarter update (shame they did not incorperate that in the current documentation)
