UDOO BOLT Basic Case

Discussion in 'UDOO BOLT' started by RedMod, Jan 30, 2021.

  1. RedMod

    RedMod UDOOer

    Joined:
    Jan 21, 2020
    Messages:
    15
    Likes Received:
    8
    Hello to all.
    I have finally finished my basic case. modeled in Blender and printed out on Prusa i3 MK3S.
    It is a minimalist design, lightweight, easy to assemble and sturdy.
    It does not need support for printing. I have used metric 3mm screws to put it together.
    For the honeycomb mesh, I have used a modifier in PrusaSlicer.
    The walls are 2mm thick. It is shared under GPL license, so feel free to adjust as you please :)
    Shared on thingiverse and myminifactory :
    https://www.thingiverse.com/thing:4714659
    https://www.myminifactory.com/object/3d-print-udoo-bolt-basic-case-149174
    I can share the blender files as well, but since you can import the stl files there is probably no need.
     
    evaloverde likes this.
  2. nophead

    nophead UDOOer

    Joined:
    Aug 18, 2015
    Messages:
    87
    Likes Received:
    14
    Nice.
     
    evaloverde likes this.
  3. evaloverde

    evaloverde Administrator Staff Member

    Joined:
    Apr 29, 2019
    Messages:
    236
    Likes Received:
    60
    Very nice! Do you need a particular kind of material to deal with the heat?
     
  4. RedMod

    RedMod UDOOer

    Joined:
    Jan 21, 2020
    Messages:
    15
    Likes Received:
    8
    Thank you nophead, i appreciiate it :)
     
  5. RedMod

    RedMod UDOOer

    Joined:
    Jan 21, 2020
    Messages:
    15
    Likes Received:
    8
    Hello, no special material, i am using standard PETG to print as it is heat and deformation resistant. I suppose PLA could be used as well but it is more brittle.
     
    evaloverde likes this.
  6. RedMod

    RedMod UDOOer

    Joined:
    Jan 21, 2020
    Messages:
    15
    Likes Received:
    8
    I am working on a new version with 3mm walls and additional honeycomb modifier object. The modifier will be user to cut ventilation holes out of the walls.
     
  7. evaloverde

    evaloverde Administrator Staff Member

    Joined:
    Apr 29, 2019
    Messages:
    236
    Likes Received:
    60
    Hey RedMod, if you wish you can link your 2.0 version here!
     
  8. RedMod

    RedMod UDOOer

    Joined:
    Jan 21, 2020
    Messages:
    15
    Likes Received:
    8

Share This Page