Hello everyone! I've spent several days and many hours on this, and can't seem to find a solution. So here I am.. My problem: I'm unable to get my 15" screen to work with a udoo dual. I have followed the tutorials but no luck. The screen's backlight is on, but nothing appears on the screen. I have *updated* the bootloader (I think it is the bootloader at least) as per the tutorial. I have a serial connection to the device, and enter the parameters as follows for a debian installation: setenv mmcargs setenv bootargs console=${console},${baudrate} root=${mmcroot} ${hdmi_patch} fbmem=24M video=mxcfb0:dev=ldb,LDB-WXGA,if=RGB24,bpp=32 saveenv I have also tried using 1366x768M@60 instead of the LDB-WXGA, but that didn't help either. In all cases it write to MCC(0) but upon boot, I get the following: and then after reboot this: From what I can see, the screen isn't being identified, but I am not sure why. It is plugged in properly and the USB is attatched to the 3rd USB connector (it is a touch 15"). The power supply is a 2A@12V. Lastly, I am able to successfully revert it back to HDMI output with the corosponding commands, so I am 99.9% sure that my syntax with the attempt to get LBD-output is correct, unless there is a typo in the tutorial. Any help or suggestions would be appreciated. Thank you in advance to whomever is gracious enough to answer. -Jay
Hi, a couple of questions first: i assume you're using Debian is that right? You bought the 15" in our shop? Your syntax is right but i'm not 100% sure it works in Debian. I'll give it a try as soon as i can. In the meanwhile try your LVDS with Ubuntu 12.04.
Hello and thank you for the Response! Yes, I am using Debian, and I did purchase the Screen in your shop. I'll give your Suggestion a go, and again, I do appreciate you looking into this. Many thanks! Jay
I tried the LVDS 15" with Debian (last release from http://www.udoo.org/downloads/) and it works! I paste the env below just to be sure: setenv mmcargs setenv bootargs console=${console},${baudrate} root=${mmcroot} ${hdmi_patch} fbmem=24M video=mxcfb0:dev=ldb,LDB-WXGA,if=RGB24,bpp=32 The only thing i can suggest you is to reflash your SD card with a brand new Debian and try again. Let me know.
