Interface cable to go between the UDOO key ESP32 10 pin header to the Grove Shield board

Got my kit in the US a few weeks ago. Just starting to figure it out since I am a rookie to micro programming.
Question: Is there an interface cable to go between the UDOO key ESP32 10 pin header to the Grove Shield board? Question mark in the attached photo
Again total rookie here working.

TIA hard to learn a new skill for fun at 69 years old

 

I think you probably want something like this. The four individual Dupont connectors on the cable could be connected to individual pins on the Udoo Key's UEXT connector. I don't have a grove board though so please verify that kind of connector is the correct type.

 

www.jaycar.co.nz/10-way-idc-line-socket/p/PS0984.

 

I just wanted to say thank you for sharing such useful information. It's exactly what I needed!

 

Actually, trying to crimp the cable with pliers doesn't work so well. Get one with the cable:
www.amazon.com.au/uxcell-Connector-Rainbow-Ribbon-Cable/dp/B01LVZ17EH/ref=sr_1_8?dib=eyJ2IjoiMSJ9.cvEWIbOw9clgBBgvX0NfCCvajy1CTwwNwC7bmzMsVIt2z6J1V5PGxj3SznG4-KHfgg-zry3VKj277cjcEWNxoiBYw3yNUfNQN15w-qxycqpicMRXalhwl2ne-XrmVqxgMQnFvIinMxHWXeHz6xKJW44whXm4_zqF49PUf33XF2muxtPgSND7bdO0EqUbUZ06VWzmusbwUyMnKeguNWSWYeTaAojvpRk1D_fjCP2rDDyo7-IqNJts1yrmAAbigN-fTTp8FSurk9cWwcIJDw7anjyxKUQQpf9rMWaD0eMrGEM.LZDm-snVI0WdFmEjpMfXr1YNbO7ZmMToa7TRGp-4LuQ&dib_tag=se&keywords=10%2Bpin%2Bidc%2Bconnector&qid=1710903695&sr=8-8&th=1