hello at all.. i have a problem of boot udoo.. I followed this guide for creating bootable of sdcard >> http://www.udoo.org/getting-started/cre ... rom-image/ << 6 month ago i have written the bottable sdcard without any problem. Now i have written the sdcard without any problem but it doesn't work. I have tried to writing the sdcard from three os system (debian,ubuntu,windows),no boot again. I have tried to connect the udoo board to hdmi and i don't see nothing. I have tried to connect "minicom serial" and i don't see nothing . I have tested the "minicom serial" 6 month ago without any problem. It's strange for me because all action are correct... The j18 is on The usb connector is connected to CN6. what i did wrong? i'm sorry for my english...I don't write correct english. Thanks at all...
we are in 2 but we will not be given any answer, accept it like I do... I'm struggling with u-boot alone and trying to get something working, but I'm quite unhappy. #Justsaying
hello unsigned, do you have clicked on arduino ide the command 'scrivi bootloader'? Do you have tried to programming SAM3X8E from external pc? Do you have tried to programming SAM3X8E without bossac file patch? I need udoo because my project now is hold.... :twisted: Thanks.
I didn't try the sam part, i need the i.mx6 part LOL but the problem is in the u-boot imho that in some case it is not read... Someone solved his problem flashing the sd card from an external sd adapter :/
I have tried to write image from external sdwriter but nothing to do. Can you help we for this problem? My udoo is new , used 10 times. :evil: Thanks
mil, unsigned, maybe there's something wrong with the MicroSD card. Have you tried to flash a different SD?
Thanks delba for your reply!!! I have flashed 5 different sdcards... I am surprised because 6 month ago it worked without any problem... Delba...Can help me? Can release a guide for flashing the sdcard? I followed this giude "http://www.udoo.org/getting-started/creating-a-bootable-micro-sd-card-from-image/" It's strange for me ... I am not a beginner...I don't know... Thanks
Hi mil, I have recently experienced the same issue with my Udoo. Previously it booted up no problem. Now the only way I can get it to boot up again is to remove all power connections. That is the main DC connection and external PC from CN6. Wait for at least 5 minutes. Then plug in the DC connector and the board boots up immediately. I suspect something is locking up the board and the only way to reset it is to allow time for discharge of power from the board. Mike
Thanks Mike i am happy for your reply, but is a mistery. Oook you have found the problem ....Very well !!! I understand now that the problem is for more people .. I think the problem is hardware system.. I'm waiting for reply from the udoo developers. Thanks Mike !!
I guess your next step now is to open a new ticket in our Customer Care section: http://www.udoo.org/customer-care/ explaining the issue and, if they confirm the hardware problem, return the board asking for a new one.
