Yes, you only need to plug into the port closest to the center of the module (the one labeled MAIN) nearest the retention screw if you only need...
Yeah, it's probably the MBR stuff.. It took me a couple tries to figure out what I was doing wrong when I was writing my Ubuntu 16.04 64 bit image...
Jake, it's less a question of the fan and more one of the connection to the board (which uses a non-standard for this application connector on the...
Ok, couple things here... 1) Talking to the Arduino pins is somewhat different than talking to the GPIO pins on a Ras/Banana Pi. You can't...
And ordered...
Nice. Thanks for the part numbers... I'll have to order those...
Try another monitor? I know not the best solution, but at least it might let you tell if it's a problem with your board or just some...
How does making it auto login make it headless? Don't you want something like VNC server running on it so you can remotely access the desktop...
Strange, I use a power strip to control on/off of power to my board (I always do a full shutdown of the OS first). When I do, (or if I plug the...
There's no "factory reset" (at least of the bios) on this board via jumpers or anything like that... Some shots in the dark: Have you tried...
Yeah, if that's the case then you have to expect that the manufacturers are going to put what limited NAND stock they have into the products that...
So last night I grabbed an old smaller (40/50?)mm 2 wire 12V fan I had laying around in one of my old parts bins. Stripped the ends and plugged...
Are you using a wireless or wired KB/mouse? Often wireless won't work properly until you have a full OS installed and booting. You ned to use...
Also, try doing a bios update. I noticed it's showing v1.01, maybe 1.02 will ID the board differently?? (shot in the dark). Otherwise, yeah, I'd...
Just be careful if you're looking for another M.2 drive to put in there. The Udoo uses a SATA interface M.2 (ie, M.2 hardware interface talking...
Also, which port on the wifi module did you plug the antenna into? Could be you're getting transient signal interference from BT or if you have...
Well, I'll say that when I initially set things up I had the antenna plugged into the AUX port on the Wifi/BT board and I got ZERO wifi signal,...
Ok, couple things to note here gang: 1) The 12V 3A is the MAX draw. That's assuming everything is cranking full blast. During idle conditions you...
@tonberryhunter - he's not kidding. Windows 10 works right out of the box... 7 is a nightmare to get working on this board... If you want a...
Strip an older/surplus ATX case for it's front panel controls. I have a setup I pulled from an old case that I use for bench testing PC MoBos...
Separate names with a comma.
