I installed 17.04, and no network problem (well, almost, not UDOOs fault). I had to use ip instead of ifconfig, because the latter is deprecated....
@mkopack, I tried my TV and my Home Cinema receiver, both no luck. I have opened a customer support ticket.
I left it lying around for a night, unpowered, RTS unconnected, now the board boots green, but no display whatsoever. I used the other power...
The second board I have is giving me some problems. I don't know what I did wrong, but after installation the startup screen of Ubuntu looked...
Got one of the two boards up and running, except for DNS. It has a wired connection and it gets the correct DNS configuration (8.8.8.8, 8.8.4.4) ....
Stupid me, the 4GB was the SD card with the installation image. :oops:
I received my 2 kickstarter boards, containing the boards and power adapters. I thought there was a need to plug in the MMC too, but I can't see a...
What is the operating system you are running on? I'm on Ubuntu, I'm not sure how other (non-Linux) operating systems work. For getting the...
I can see only two network interfaces, local loopback ('lo') and the wireless network (wlp2s0). Your system does not seem aware of any ethernet...
My 17.04 still calls it eth0, but yes, it might have a different name. Use ifconfig -a , otherwise it might skip inactive interfaces.
What does lspci | grep -i eth output? It should tell something about the ethernet controller, if there is no output no controller is seen. If that...
What is the output of ethtool eth0? Especially, does it report a link is detected?
For my UDOO Quad project @graugans has aided me tremendously by creating a minimalistic Yocto variant that supports the integrated graphics card....
Can you connect an HDMI (e.g. a TV) and a DP monitor? If you then boot into your OS you might see if it detects two screens or a single one.
Hopefully with @Laura on board UDOO will be able to get the community more involved.
As with any project, if you have to spend resources on different matters other parts will have to wait longer. A good team will then decide which...
Shouldn't you enable the corresponding port in the bios? See the manual at...
Yes, congratulations @Laura . I wish to express my hope that this will help the community to thrive more.
Wondering, why are you adding a fan already? Why not only do so if you notice that the system gets into trouble without a fan?
Given that UDOO mentions the idea of starting the main CPU from the Arduino I'd be quite surprised if one needs a second power source to keep the...
Separate names with a comma.
