@evaloverde you did not answer this question. I am also wondering. You even made a new documentation set for it so there should be a difference...
Just use the Linux side of the Neo to send the message. Look for Raspberry Pi examples and the will most likely also work with Udoo Neo. If needed...
What Arduino web editor? I do not think the Udoo Neo is supported by it. Only supported by the preinstalled Arduino IDE on the Neo itself or by an...
You can also use the build in Arduino Leonardo to run the rgb LED strips....
And default setting of IOMMU is disabled so if you did not change it yourself it should go well.
Looking back in another topic they seem to have similar issues:...
You could also try to use the latest Ubuntu LTS (20.04), released on 23 april 2020 https://ubuntu.com/blog/ubuntu-20-04-lts-arrives
Perhaps this will give you some hints how to change to timeout: https://docs.blissroms.com/Bliss%20OS/troubleshooting/ It all depends if you are...
Hello Kirk, Your reply just got visible for me so now I can reply..... As mentioned there is an issue with Serial.Print but it can be handled. I...
What Uefi/Bios version are you on? The latest one? It does not sound like a common problem. Are you using the build in eMMC? because that could...
The documentation page is changed after the firmware update so the documentation Page should show the default settings....
Next time please ask your question in a new topic or a fan related topic as your question is completely off topic. But to answer it: look here...
Stupid me, FreeBSD uses its own kernel so you will have to check if the AMD eMMC driver is implemented.
For installation on the eMMC on the Bolt you need a patch or a Linux version that already uses a kernel >= 5.2.5 See also the documentation...
There is now a special documentation page about fan settings https://www.udoo.org/docs-bolt/BIOS-UEFI_and_Tools/Fan_Settings.html
I meant the power failure resume type....
Did you modify the power resume type in Bios?
Who told you that?
What is your problem? OpenHab runs even on a Raspberry Pi so a Udoo Bolt could do this without any issues....
Separate names with a comma.
