What is your problem? Did you see this page:...
There is now a special documentation page about Fan settings https://www.udoo.org/docs-bolt/BIOS-UEFI_and_Tools/Fan_Settings.html
From the BIOS History (1.08 is the latest released) it looks like the issue was already fixed in 1.06: - added always ON Power Failure Resume...
For examples see the how to topics in my signature. The trick is that there is a small buffer which can overload easily stopping the A9 part. So...
You could connect the serial debug console and check the messages there. https://www.udoo.org/docs-neo/Basic_Setup/Serial_Debug_Console.html
To be sure I would make a new Ubuntu Live USB (perhaps 18.04.LTS) and boot from it. It should work normally, no need to use safe graphics mode. It...
So to recap: 1. You startup Ubuntu live from USB but can only use safe graphics mode. (This is not normal) 2. You install Ubuntu from live USB....
It looks like your Ubuntu live USB is not correct. Did you follow the instructions in the getting started section chapter 3 and 4?...
Option 1. The installation of Windows prevents you of installing Ubuntu. So first remove Windows and then install Ubuntu (on eMMC). Option 2. You...
Please read my answer carefully
Isn't that the blink of the build in Arduino Led? You will have to install Arduino IDE to switch it off. It is running a sample program....
Well, startup with a live Ubuntu USB drive and remove Windows 10 (reformat the complete M2 drive). Reboot and then install the OS you want to...
Dus you try to install Ubuntu first and then install Windows 10? If I remember correctly this was a necessary installation order in the old days....
Do you have a fan with a green dot? There is something wrong with that, see also...
mine is called /dev/ttyACM0 I have also an USB device connected and that is called /dev/ttyUSB0
I will check this evening
The BLE firmware update was automatically run the first time i tried to upload a sketch. I saw it in the Arduino IDE monitor.
Just to be sure that you did the following steps before we continue: Did you try to reinstall the Arduino IDE and 101 board manager after a...
In the bios itself. Press ESC ESC button during startup and select SCU to enter bios and see the version....
What Uefi (bios) version is your X86 on? The older ones had an issue of not recognizing the SD drive. See for update instructions for the latest...
Separate names with a comma.
