SD card should be resized on first boot automatically. To expand the system to use all of the space on your SD card, SSH to the Udoo and run the...
Another possible solution: http://openelec.tv/forum/144-usage/7473 ... net#128620
salouma, run this command (only once). echo "ethtool -s eth0 speed 100 duplex full" >>/storage/.config/autostart.sh cat...
Use modprobe -f <module> Or compile your own kernel with CONFIG_MODVERSIONS disabled. More info.
Can you download something from internet and then run command ifconfig -a | paste dmesg | pasteand post url you get back. Also try forcing...
Shevonar, when does Arduino starts running? immediately after connecting power or little later? And stops when Openelec starts? Would it helps if...
Probably this: http://lwn.net/Articles/571031/
No idea. My intension was only to run Openelec. Don't know how Arduino actually works on this board so any tips would be useful to fix this issue.
Testing locally between udoo and web server on Windows over 100 mbit network: OpenELEC:~/downnloads # dmesg | grep udoo [ 1.071970]...
No though. I didn't done any network testing. Try to copy locally between hdd and usb stick for example.
No. Doesn't have any spare disk. From what I see SATA is enabled in u-boot. I think you just need to set correct boot=/disk=. Same as you would...
Thank you very much. Install rsync addon from openelec unofficial repository.
Maybe because GPIO is to slow for this?
If you have any question let me know. Here on PM.
idorel77, this is my complete imx6 project supporting tbs matrix and udoo. If you want to play with....
Currently udoo is not yet supported (and others also not). When my changes for imx6 project will be merged I will also update for udoo.
All changes are still the same as for official imx6 build.
OpenELEC 5.0.0 Udoo: https://drive.google.com/open?id=0B4FdV ... authuser=0
Yes, after 5.0 (soon).
Good to hear that spend time was not wasted. Happy Christmas udoo community.
Separate names with a comma.
