@andy-burns Ettore has just tested on his board with the pre-release 1.04 firmware, and it functioned as shown in the photos of my board. Have...
You are correct, the front panel LED is operated by the STM32. Not sure why the 2pin LED you purchased did not work. As far as I'm aware, there is...
Due to the interest in connecting an external LED for status information, I have set up a simple circuit to show expected results (though I used...
The Bricks are 3.3V. Do not connect them to a 5V source. If the BME280 from Adafruit module you mentioned is this one...
Here is the description of the power status pins on the front panel connector: FP PWR_P/SLP_N: Power/Sleep messaging LED terminal 1 with 510Ω...
Maybe a permission issue. Refer to the following page of the online documentation:...
Refer to page 35 of the manual for pin information: http://download.udoo.org/files/UDOO_X86/Doc/UDOO_X86_MANUAL.pdf The mating connector is also...
The team behind UDOO love being part of a community that continually explores the ways hardware can positively reshape lives. We are always...
UDOO is not a member of the AXIOM consortium. AXIOM consists of the following organisations: BSC (OmpSs), EVIDENCE (LinuxOS+RunTime), FORTH...
UDOO and AXIOM are run independently of each other and controlled by distinct organisations. Herta is a member of the AXIOM consortium. The...
There are two types of bicolor led. A 3 pin and a 2 pin version. The Intel ATX front panel standard specifies a 2 pin version. The voltage...
Thanks for the heads-up! The spelling has been corrected.
:eek: I've removed the spam. There was a public holiday yesterday in Italy.
Units are in stock now. Thank you for your interest :) https://shop.udoo.org/udoo-x86-ultra.html
That would be awesome! Thank you for creating an image.
We recommend a power supply capable of supplying 3A, to cover scenarios where a user connects peripherals that draw power, for example, SATA hard...
The power joins the 12V_ALW Net at the functional block that contains the connector CN21.
There are various components between the power jack and the 12V_ALW circuit: A High-Side Reverse Bias / Reverse Polarity Protector With...
To power the board, use the DC Jack (12V). Refer to the schematics for further information on how power is routed on the board:...
There is an eGPU project shared on Hackster: https://www.hackster.io/matteodelbalio/udoo-x86-with-geforce-gtx-1060-gpu-2aed20 Regarding the...
Separate names with a comma.
