Here are some backgrounds I udooized starting from some free ones... [img] [img] [img]
Yes, I had the same problem with PHP, setting up permissions on the serial solved it sudo chmod 777 /dev/ttymxc3
Re: Arduino Shields Compatibility list: share your experienc For the joystick shield, there is a fix that must applied to the shield itself (cut...
Install PHP, configure it so the standard mail() function works, or better use some classic mail library. Download and compile the Pilot.ino...
I have been using the internal serial port at 115200, but I don't know if it can run faster, although I have seen code for Arduino specifying...
It might be faulty, because audio works fine on my quad with stock Linaro Ubuntu and a speaker connected..
One cool thing is that it takes power from the board, you don't need a power cord, just one cable. I glued it (just one drop) to a small cardboard...
I got the official 7" from the UDOO store and it works quite fine, although resolution could be higher (most 7" tablets have many more pixels)...
I would second a flat monitor stand where I can glue with four drops of hot glue, or some biadhesive stickers, one of the standard monitors and...
Mine arrived and setup! Easy, clear instructions, great look. Really cool! Thanks, great job!
Here there is the modification for using it at 3.3V: https://stefan.co/electronics/joystick- ... it-driver/ (not sure if I will do it, with I...
Thanks Mike, I can confirm the buttons all use the Arduino internal pullup resistors (as the code detects for a LOW as a button push). I will have...
I have bought and built a Joystick shield: http://store.arduino.cc/index.php?main_page=product_info&cPath=37_38&products_id=126#.UyWGR14cOvE and...
I can confirm the udoo is fitted with pull up resistors because I have used them to try to detect button push (pin getting to LOW on push). And...
Then this: http://www.udoo.org/ProjectsAndTutorial ... eb-server/ will install PHP, Apache and Mysql on the UDOO (I did the "simple way" and...
Just a quick reminder: on a Mac, *DO* *NOT* copy and paste the code. It seems to work ("Saving Environment to MMC...") but parameters are not...
It mostly depends on your preferred language/server, PHP, Python, Javascript, C++ with Apache/Node/.. If you can write "get a A0" to a serial...
Re: Linux to arduino controlled TFT LCD You have to setup the Arduino to read some string from the serial port, then translate this string to...
You can install PHP on the UDOO (there is some tutorial) and then you can read the arduino sensors from PHP using the pilot.ino sketch, here:...
The same code would work quite fine with most sensors. Assuming the sensor is analog and outputs voltage the code would be quite the same, the...
Separate names with a comma.
