Search Results

Search Again
Page 5 of 10
  1. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    Thx, for pointing this out @waltervl . I'll put this on the TODO list.
    Post by: graugans, Jul 20, 2016 in forum: Yocto
  2. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    And you can only use eglfs on primary display AFAIK Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jul 12, 2016 in forum: Yocto
  3. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    Due to the fact I still have no lvds it's hard to test. But remember a62 has different logic to select lvds Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jul 12, 2016 in forum: Yocto
  4. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    I finally managed to integrate this into meta-udoo, sorry for the delay.
    Post by: graugans, Jul 11, 2016 in forum: Yocto
  5. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    Back from the beach. You may have to enable the pure-ftp server and add an bbappend for its configuration. I would recommend to use ssh instead...
    Post by: graugans, Jul 10, 2016 in forum: Yocto
  6. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    Yeah, they forgot football is all about goals :) Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jul 8, 2016 in forum: Yocto
  7. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    After watching the match yesterday I found no time to test :( Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jul 8, 2016 in forum: Yocto
  8. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    Have you installed 32Bit libraries Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jul 7, 2016 in forum: Yocto
  9. graugans
    Post

    CanOpen communication with Qt on udoo Neo

    Another option is to use the network interface set-up...
    Post by: graugans, Jul 7, 2016 in forum: UDOO NEO
  10. graugans
    Post

    CanOpen communication with Qt on udoo Neo

    You can login with another ssh session to the board to get another shell or use screen inside the first session....
    Post by: graugans, Jul 7, 2016 in forum: UDOO NEO
  11. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    Okay, looks like the Arduino GUI uses USB to serial in your case I'll check the schematic and try to find some time this afternoon to investigate...
    Post by: graugans, Jul 7, 2016 in forum: Yocto
  12. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    This needs some investigation. UDOO Quad/Dual needs another tooling AFAIK something called bossac. And the arduino tooling may expects the UDOO to...
    Post by: graugans, Jul 7, 2016 in forum: Yocto
  13. graugans
    Post

    CanOpen communication with Qt on udoo Neo

    Sorry, I did not yet managed to attach an CAN client to test. Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jul 4, 2016 in forum: UDOO NEO
  14. graugans
    Post

    Using the UARTs

    I would check the schematics + the i.mx6 reference manual and then check the device trees Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jun 24, 2016 in forum: SECOSBC-A62
  15. graugans
    Post

    CanOpen communication with Qt on udoo Neo

    Regarding WiFi you'll find Info's here: http://www.udoo.org/forum/threads/openembedded-yocto-on-udoo-boards.2965/ on second posting Gesendet von...
    Post by: graugans, Jun 24, 2016 in forum: UDOO NEO
  16. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    Check out the hush shell section here: http://www.denx.de/wiki/view/DULG/CommandLineParsing Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jun 24, 2016 in forum: Yocto
  17. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    If you access lp5521 via i2c you may get some info here https://github.com/graugans/meta-udoo/wiki/UDOO-Neo Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jun 24, 2016 in forum: Yocto
  18. graugans
    Post

    OpenEmbedded/Yocto for UDOO Boards

    I'll try to write some howto when the Makerfair Bodensee is done. http://www.makerfairebodensee.com/ Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jun 24, 2016 in forum: Yocto
  19. graugans
    Post

    CanOpen communication with Qt on udoo Neo

    You followed the instruction from my post with the image link?. Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jun 23, 2016 in forum: UDOO NEO
  20. graugans
    Post

    CanOpen communication with Qt on udoo Neo

    I try to set-up a VM to test. Gesendet von meinem FP2 mit Tapatalk
    Post by: graugans, Jun 21, 2016 in forum: UDOO NEO
Showing results 81 to 100 of 198 Next >
Search Again
Page 5 of 10