I havn't had any trouble while testing Stretch either, but for those who want to wait until official release, it's now been released. :)
I deleted my post about RAM test - I don't really know if it's safe to use the board with capacitors out or badly soldered. But if you want to...
Interesting that Basic is so much slower than Advanced or Ultra. Board Total time ---------------------- ----------- UDOO...
Some reading while waiting for release announcement: Debian 9 Release Notes (currently still work-in-progress version)
I remember there being at least one post on this forum earlier saying that UDOO X86 is slower than RPi. Can't find it now but I think it was about...
Interestingly sysbench result is 10x faster as claimed -- post.
sysbench --test=cpu --cpu-max-prime=20000 --num-threads=4 run UDOO X86 Ultra (Debian Stretch, sysbench 0.4.12) Test execution summary:...
I started a new thread for CPU benchmarks: RPi 3 vs. UDOO X86 CPU benchmarks
As there has been some discussion about how good the CPU of UDOO X86 (all versions) actually is, I thought it might be good to have a thread for...
Well, rpi3 is 1.2 GHz and UDOO X86 Basic is only 1.06 GHz. (Other models are 1.6 GHz, i.e. Advanced, Advanced Plus and Ultra)
I'm currently learning more about UEFI (havn't used it before UDOO X86). UEFI stores many important variables in NVRAM (e.g. relating to booting...
Just by looking you can at least know how much eMMC it has. The eMMC chip is next to the two USB ports and has white 'eMMC' text next to it. For...
How did you mod the BIOS?
@Jetguy You forgot to mention direct GPIO lines to SoC (not just on Arduino side) which you do not find on almost any "normal" motherboard. Sure...
"AC1" temperature in BIOS sets the temperature at which fan will start but unfortunately lowest setting is 55 C. There is also "disabled" option...
Reason for that is probably that different programs have different opinions of how big one "GB" is. It can vary from 1000*1000*1000 bytes to...
I'm not sure about eMMC. As for SATA HDD, the power connector on UDOO is non-standard and also only provides 5V and not 12V, and both are usually...
I can't recommend UDOO X86 until all promised features are delivered.
So in short, you can use mobile power pack as long as it fulfills following requirements: output connector is 5.5mm/2.1mm barrel connector with...
Recommended current of 3 A includes a lot of room for other devices like WiFi card, hard drive, etc. For example in my tests with UDOO X86 Ultra,...
Separate names with a comma.
