I just did quick test of read/write speed with Samba. (Note that neither computer used SSD so this can affect speed.) UDOO X86 Ultra with Debian...
More testing: "cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq" returns "2048000" (i.e. 2.048 GHz which according to intel-pstate...
I'm testing this with Debian 9 (Stretch) and problem seems to be that default policy doesn't allow max speed. After installing package...
Pressing that does nothing.
I just got my 3.5" drive ready and took some measurements. System is UDOO X86 Ultra with 128 GB SSD (M.2), 3 TB SATA (WD Red), 80x80mm fan, HDMI...
UDOO developer said in other thread that SATA power connector can supply 4A at 5V. (However I noticed that my 3.5" drive only uses 12 V.) EDIT:...
Yes, as I live in Finland I rarely order directly from Adafruit - but they do have many distributors. Also thanks @itimpi for reminding about...
Since UDOO X86 already has 12V from its own power source, I'm going to use split power cable to power both 3.5" HD and UDOO from same power...
Hi, I'm also thinking of using UDOO X86 as NAS with following setup: UDOO X86 Ultra Debian Stretch (hopefully released in near future) gigabit...
This was just answered in thread Arduino power ON in S3/S4/S5 CPU mode? - Arduino shutting down is firmware issue and will be fixed early next week.
I considered this to be a major feature when I backed UDOO X86, so I definitely want answer from Udoo of whether this will be possible.
No, link HAS NOT remained same. Why do you lie?
Just tape 80x80 to the side, it fits perfectly. ;) https://twitter.com/MarkusLaire/status/857609748178403330
I thought that Windows 7 is the one with bloated UI and I'd expect Windows 10 to work better.
I was getting that also. I "fixed" that by deleting all partitions in eMMC and SD card before starting installer (see my post above).
I am able to select SD card as installation location if I first delete all partitions. My steps so far (after updating BIOS): start UDOO X86,...
First check that BIOS was really updated. Press ESC when booting, then select "SCU" from menu. You should see "Bios Version 1.02" at top line....
Rechecking PDF instructions, it seems I was wrong and instructions are correct, however a bit complicated. I just created simpler updater:...
Ubuntu 16.10 contains everything needed, however UEFI update instructions are missing one step where you need to copy H2OFFT-Lx64 out of x86...
In Debian Stretch, with 'halt' LED stays green but with 'poweroff' or selecting 'shut down' from GUI LED turns amber.
Separate names with a comma.
