Had a friend go through similar surgery several years ago and he was mostly laid up for the better part of 3 months and even then had to take it...
Doubt this has what you're looking for, but look here: http://www.udoo.org/downloads/
Hate to say it, but haven't seen or heard from Kintera since he posted back in mid December. Hope everything is ok or that he just got busy and...
Also, does your test program us a lot of memory? It's possible if it does that it's causing the system to swap out to virtual memory (which on an...
Ok, sorry, just having a hard time understanding what you're saying (English obviously isn't your first language) so trying to piece it...
Hopefully the Udoo team is working on making versions where you just DL the version for whichever LCD you need (or none).
Sounds like the write to the SD card is causing a block stopping other processing from happening. Remember that if your file operations are...
What drive is it? Some drives require 12V which the udoo's cable does not provide.
And like I said, check the wiring, you might need a pull down resistor in there on the pin along with the PIR output. It's possible that when the...
there's a few Open-source alternatives, some of which match Matlab language syntax. I'd suggest looking into those... Much more likely to find one...
Ok, maybe I'm missing something, but you're telling it that you want Pin 7 as an INPUT, so why the heck are you WRITING to it (which means you're...
also this plan would probably work best if you can find one where the interface between the lid and the bottom was the same height all around. The...
Well, after looking at (and measuring) the hardware (UDoo, SSD, 7" touchscreen, camera module) the only way it'd even be possible is in a box made...
If you go to the Downloads section of the site, in the Documentation section there there's the Mechanical Specs files that should have everything...
I forget what his name was... He was putting up repeated posts in Russian (which I know some of, and used google translate to realize he was...
that is strange, given that both boards use the same Microcontroller chip for the Arduino side... I could see it if they were different chips that...
In fact, it also has me wondering if the 7" screen could be mounted inside/against it as well... Hmm... Might have to get out the ruler tonight!
While unpacking an old box of desk supplies last night, I came across a plastic 3x5 index card holder box. That got my thinking - I bet a Udoo...
Ok, caught a russian spammer flooding the forums and managed to turn off his account before he did TOO much damage (about 30 posts across all...
you shouldn't need to remove the built in one to get the usb one to work... Chances are you're just missing a driver (or kernel support for the...
Separate names with a comma.
