Hi, what's the difference between RC2 and RC2 Minimal?
I'm experiencing the same problem, and after submitting to customer support the boot logs recorder with a serial/usb adapter, they told me there...
great news Andrea :) I will try also to follow installation instructions for Beaglebone, if someone else is interested let's share the results....
I will try to install it, thank you. Anyway, for complete noobs as me I would like to say that I have been able to set port 22 (SSH) forwarding on...
Hi, I came through this service called Weaved, available for a number of embedded platforms like Raspberry Pi. Running their software on the board...
Yes I installed UDOObuntu 2 RC1. I2C-4 was shown on pins 34/35 in red in the device tree editor. I will try the reset to default and reboot. If it...
Hi, I had been able to correctly use a LCD connected to I2C-4 (pins 34/35). After a OS reinstall on the microsd, now I don't see it connected...
I read in the documentation: UDOObuntu 2 is based on Ubuntu 14.04. It is provided in two flavours: without any GUI (ideal for headless...
I did it, and I was told to try to connect to debug serial port UART1 to see the log at startup. I will update once I get a USB / serial adapter...
Please forget what I wrote above: my Neo has booted once, opened Web Configuration panel, then I rebooted it and now the HDMI output is completely...
Well, I managed to boot it up again burning the OS on another SD card. With the previous one, it was working flawlessly until I lost the USB...
Ok now I understand. And this missing feature of the device configuration tree is to come in a future beta release or in the final version of...
Ok, I was talking about switching from "GPIO behaviour" to "I2C behaviour", not about changing the pins. This is possible, isn't it? For which I2C...
I didn't tried yet to use the gui of device tree configuration, why do you say I can't remap the pins to the I2C ports as explained in the...
I read the section about the Device Tree Editor; if I understand, a change in the device tree configuration is needed only if I want to use those...
Ok I will give it a try, thank you. For Udoo guys, when do you expect to publish a final version of the documentation? Inviato dal mio iPhone...
So the I2C ports have to be manually "enabled" to work as I2C ports? Is this reported in the online documentation? I don't remember having read...
Hi, I succesfully connected a LCD device through I2C pins 34/35 (I2C port 4), I see it connected with command "i2cdetect -y 3" and I can properly...
did they offer you a replacement?
Thank you Inviato dal mio iPhone utilizzando Tapatalk
Separate names with a comma.
