First, do you have another computer you can test your USB flash drive to make sure it is bootable? Next, when you boot the UDOO, press ESC until...
It is safe to delete that partition and files.
Steve, keep in mind that we the backers wanted features added. They listened. This required a not so minor re-design of the board in the middle of...
From what I've been able to find out so far, we can not modify the cpu frequency above 2.00GHz. This is handled by the CPU automatically and only...
It shouldn't be too difficult to make an ISO that auto updates the BIOS. It's just a matter of installing a minimal OS, setting up the updater to...
You can buy any 30mm x 30mm x 10mm fan. It will fit perfectly on the heatsink. Just use a few screws (usually included) to secure it. Just don't...
I've updated my original post with 2 additional pics now that I've properly soldered the wires. I just checked and the envelope with the adapter...
It looks like kickstarter pledges are still being sent. Shipping started late as a result of issues found when they did a redesign of the board....
If you did the BIOS dump and then used that same dump file, you're updating to the same version that you already have installed. Either use the...
Once I've got everything figured out, I'll update you. As far as your current setup, the only critique I would offer is that the fins on the...
If you'd like, I can make one for you and send it in a regular envelope. It may take longer, but shipping will be much cheaper. If I'm reading the...
Yes. Just be careful to not over tighten. Once I've soldered the wires and header, I'll update the pictures.
Is it a 3 or 4 ring plug? Is audio over hdmi an option for you?
It should just be 4 screws. Just be careful to not over torque the screws. They don't require a lot of force.
For anyone like me who plans on using their UDOO x86 with a heavy CPU load, a fan will be a must. Since the officially offered fan is not...
After playing around with mine a bit more, you can repeatedly press the ESC key for about 5 to 10 seconds upon turning on the board. I was...
The thickness of the fan is really based on which one you buy. The one I bought is 30mm x 30mm x 10mm. If you're planning on removing the heat...
Here are the steps to change the video setting. Look farther down for alternate steps to reset the bios to defaults. Press the power button,...
When I get home, I'll get you the key presses needed to enable this.
There is an option in the bios for enabling waking the board from the Curie. If you're having trouble getting this to work, make sure this bios...
Separate names with a comma.
