The video should be using hardware acceleration ie not using the CPU to decode the video but passing it to VPU (thats the point of having it)....
Its a known issue with DRM protection on Sky Go, this thread sheds some light.
Not sure what action your expecting, but that change is just for porting rpsmg support to MQX which in itself is EOL (dropped by NXP for imx6sx)....
On the plus side making you wait and if you haven't pre-ordered is that you may have more choice for a x86 sbc. The 'up squared' (Apollo Lake, so...
@Laura, what ever was fixed has now removed the x86 forum when viewing the site in chrome on a mobile, all other forums are visible.
Unfortunately I can't always open source it, what ever can be open source or made public has been. Most of the Neo work I produce are mainly spins...
@Laura any chance of open sourcing the firmware, if its for the stm32?
[MEDIA] Here we demonstrate how the cortex M4 can be used to implement the Dallas one wire protocol to read two DS18B20 temperature sensors. The...
Either that one or this type (which I use) should work.
You always require a transceiver (3.3v compatible) from the NEO side, connecting the CAN H/L pins directly to the bus my damage them.
A fair amount of information is available in previous threads covering CAN connectivity, see last post in this thread. If your a novice then you...
That class should work, however before that you need to export the gpio pin as device as per this link from a root shell in android. If...
The simplest way from Andriod is to export the gpio (same for linux) see this link and as along your application has permissions to the file...
A number of old threads (thread1, thread2) discussed HDMI resolution changing (or lack of). Short answer if you want to change it them you need to...
I guess what is not made clear this that this range of Intel CPUs are from the Mobile range and therefore are optimized for battery operation ie...
You would need to enable usb gadget support in the linux kernel and probably implement a driver (unless there's something you can reuse) to link...
It seems a bit convoluted (as well wasting peripherals) to send data from M4 via a serial port back to the A9. The imx6sx has built-in mechansims...
It only support OpenGL ES 2.0 there's no OpenGL support. You may be seeing Open GL 2.1 support because the udooubuntu release may contain an...
The resolution on that display is 1280x800 which is non HDMI CEA mode so may need to alter the display timings to get it to work or if your lucky...
There's a lot more to it as the STM32 needs to support FAN + wakeup + CEC + IR, furthermore the STM32F100R4H6B is low spec 16K flash + 4K RAM. So...
Separate names with a comma.
