In theory, you would want your cache to be as fast if not faster than the permanent storage medium. I do not believe this would be the case if...
That could be a good option. I went with https://www.amazon.com/gp/product/B018AOZ9QM/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and two...
Has anyone use a dual SSD m.2 enclosure:...
I have reviewed the forum threads regarding RAID on x86 but I'd like an update. I'm looking for a simple way to implement RAID 1 in hardware,...
The closed source, proprietary firmware for Udoo's x86 SBC is increasingly disappointing. I find it unfortunate that the developers did not take...
1) Which port are you connecting it to? 2) Have you tried connecting it on a different port? 3) Have you tried connecting it on a different...
I've got working drivers for both the RealTek 8111G/8168G and SATA/AHCI controller for the unsupported (open source) operating system I am working...
Never mind. After I found Intel documentation stating IDE emulation mode is not present in Braswell, I ported an ahci driver.
I'd like to do this. I do not see an option in the BIOS to configure this. What is the default mode (AHCI or IDE emulation) for the SATA chip?
I'm working on porting the SATA driver from the unsupported OS I have been working with, and I'm running into some issues. Working with UEFI is...
More on this: I have been playing around with BIOS and Extended BIOS calls, on interrupt 0x13. This is what I get for standard BIOS Read Drive...
The 8G is coming from using 512 bytes per sector for the calculation. I get 32G if I use 2048 bytes per sector. I do not know if this is...
Does anyone know what are the correct C/H/S geometry for the eMMC and microSD cards? The BIOS is reporting 0 sectors Aug 6 04:42:22 192 kernel:...
I ended up not reading the DTCC in the driver and it works great now. Bill Paul, the original author of the if_rl and if_re drivers for FreeBSD,...
In addition to schlonzo's steps, make sure the boot partition is marked "bootable."
Please release clean (BSD-licensed) binary-free source code so that we can build our own updaters. "Open hardware" should not force us into...
I can't speak for the upgrade, but I had the same problem with 1.02 and fixed it with this headless adapter...
I found the answer. In the UEFI firmware, under Device Management, there is an option for network. It shows the MAC address.
Might be a long shot, but have you considered a faulty power supply? Maybe a component is heating up and failing, but the UEFI is set to...
I've gotten the RealTek 8111G ethernet chip working with the unsupported OS I am porting to the Udoo board, by following an earlier driver...
Separate names with a comma.
