I wasn't clear. While there are Windows, DOS and Linux options for the installer, this is a clean room environment, without those options. I...
Does anyone know of a BSD-licensed firmware installer for Udoo x86? Windows, DOS and Linux are not options.
I've noticed this problem is preventing the unsupported OS I am porting to Udoo x86 from setting the clock at boot. I've manually disabled...
I'm not familiar with GRUB, but the native bootloader I use with the OS I am porting to Udoo lets the user drop into a configuration shell with...
When you say "banging on the Escape key," are you literally pressing it down and letting it up repeatedly? Or are you holding it down and keeping...
Thanks, but Linux is not an option. I want to independently verify this information, without resorting to using a specific (or any) operating system.
I appreciate you taking the time to try to help, but as I indicated I am porting a driver from another operating system (to the unsupported one I...
Is there a way to confirm the MAC address in the eeprom for the Realtek chip? I need to make sure the driver I am porting is not reversing it....
Thank you. I always look for leadership by example in anything I invest my time and energy into.
Make sure you are holding the ESC key down early enough in the boot process. Hold it down while powering up, if need be. Make sure your keyboard...
Recently, as part of my effort to port an unsupported OS to Udoo x86, I had to debug that OS's e1000 driver, which is used for the Intel 82540EM...
I appreciate the clarifications, given the above statement: "Anyway, the UDOO cofounders are also involved in the AXIOM Project, for which I work...
OK, for clarity and accuracy, I will restate it as "Udoo is a member of a consortium (AXIOM) in which a different corporate member (Herta) has the...
From the AXIOM web site: "Smart Videosurveillance AXIOM will enable companies, such as HERTA, to deploytheir multiple face recognition in...
How far apart are the serial numbers?
The revision stamp is on the back on the right hand side, in between the two checkmarks. My serial is K72880920. I don't know the correlation...
I'm using a TTL to USB cable, and I was advised by Udoo to swap Tx and Rx, to create a null modem cable. I have UART2/ COM2 port turned off...
Hi Georgia, I'm not using an unsupported BIOS, but an unsupported bootloader and OS. My apologies - you did say you are printing to the serial...
Out of curiosity, have you tried using the COM1/COM2 side of the UART connector for serial communication?...
Yes, according to the invoice. Splash screen and device screen used to work.
Separate names with a comma.
