Also as a side note found this just now. https://lkml.org/lkml/2019/9/21/31 Check if you also have IOMMU on, it could indeed be a problem with the...
I think the older kernel drivers do not see some of the newer components on the Bolt like eMMC.
I am reading in the manual that you can supply the Bolt through USB Type-C power in with PD sink profile 20V/3A(60W), and I am wondering if I...
I just saw you mention you tested it with an osciloscope.
Maybe the LED pins pulse too fast to register on thge voltmeter? Also I might be wrong, but the manual mentions "HD_LED_P: Hard Disk Activity LED...
NBIO Common Options > GFX Configuration Set Integrated Graphics Controller to Forces Set UMA Mode to UMA_Specified then you can set the UMA Frame...
The Reset Causes Handling has some flags that get set once a certain event happened, like if you suddenly loose power and it was not halted...
In the BIOS in the Embedded Controller menu there should be Reset Causes Handling, could help.
It seems for the three wire fans, when you PWM, the tachometer gets garbled signals, which is why the "Enhanced 3 wire RPM measurement" exists in...
I was trying to find the EAPI for another language except C++ but could not find anything at all, has anyone had any luck finding alternative...
It is the default fan, just wondering other peoples readings on this matter before I try to tinker further with it.
The Bolt is not using the signal/tachometer pin at all? Though the "Fan Settings" page mentions about it using the tachometer signal, even the...
Hello, I checked my fan speeds in BIOS and at 35% it reports ~6000RPM, and when it hits 100% it reports ~3500RPM, is this some sort of error or...
Whining/hissing sound from the bolt is known problem, there is a thread somewhere around this forum. It went away for me when I connected a USB...
Any voltage will do, you could go as big or as small as you want.
Weird coloring for the ground cable, did you check it with a continuity meter?
Think it is the same, except eMMC and the case/accessories it comes with.
If you search for "vega 8 witcher" as I did you will also get plenty of videos benchmarking The Witcher 3 on the Vega 8.
If you can not do it, any electronic repair shop can solder it back in place, should be less than a minute work.
If you would like to use the two AMDGPU-PRO drivers from AMD then the kernels they support are 4.19.8 and 5.4.2 respectively, otherwise any other...
Separate names with a comma.
