I managed to set a udoo neo as a bridge. - I bought a Wifi dongle...
Ok, after some further checks with @ektor5, we blamed the device editor as we said in this topic too. The i2c problem was due to the presence of...
So which was the correct configuration at the end? I think if you swap to wpa_supplicant (through /etc/network/interfaces changed) you stop using...
Be carefull, according to your university's website, your identity is "Your UofH email name (without the "@hartford.edu" part)". So retry all the...
If you can copy your wpa_supplicant.conf ( hide password :) )
Hmm that means it's not connecting... Do 'dmesg' and copy the output. Even /var/log/syslog may be useful. Did you try to remove phase2 too?
Remove also phase2 because you don't have it.
Yes from your university website, it seems you don't have certificate. Do you get an IP removing ca_cert from the second example?
Try also: ctrl_interface=/var/run/wpa_supplicant network={ ssid="NETWORK_NAME" key_mgmt=WPA-EAP eap=PEAP...
Ok, in that case we're talking about WPA2-Enterprise that may be more difficult than WPA2-PSK. Eduroam has this kind of configuration. Do you have...
Hi Krista, Eduroam is a World Wide Education Roaming Wifi but it's available only for the universities that joined the project. If your university...
Now /dev/ttymxc5 is up but I can't get data from it. Should I fix the kernel with the old .c fix we used to do or should I use ektor5's fix again?
Ok, current status: - /dev/i2c-1 doesn't exist now. Correct. - Sketch starts everytime without hangs. Perfect - I added a delay(2000) between...
Do you use 'eduroam' or another university network? Did you try wpa_supplicant?
Does it mean that my device tree editor is broken? :( Why? In order to change my imx6sx-udoo-neo-externalpins.dtsi, should I recompile all the...
Ok I did it with: dtc -I dtb -O dts imx6sx-udoo-neo-full-hdmi-m4.dtb This is my dts: https://pastebin.com/NBPLFCXt
In /boot/ there're only the .dtb files. Where are .dts? Shall I compile it locally to get .dts?...
This is my boot output: https://pastebin.com/Ujs9uvZW I used another Udoo to read the boot. I supposed I'm using...
Yes it does. [ 0.107127] i2c i2c-0: IMX I2C adapter registered [ 0.108873] i2c i2c-1: IMX I2C adapter registered [ 0.109634] i2c i2c-2:...
Of course. I opened a support ticket and I will report any progress. Now they asked for my /boot/uEnv.txt to check if my device tree is correct...
Separate names with a comma.
