Hi Amit! In order to get ttymxc5 (UART6) I suggest to install these packages and reboot:...
o_O Wat? It's the opposite from before! Ok so..since I'm using SDA/SCL from internal pins (M4) I set: Wire.begin() in my setup() and I removed it...
Hi! Sometimes (rarely but it happens) my network card failed with some bad kernel errors. Here's some: Jun 12 09:37:07 localhost kernel: [...
Uhmm the define should do the same effect as change all of them even if fhe documentation is not clear about changing only the begin or everything...
Hmm Actually it's something I'll ask once I get my code working :) At the moment is a prototype PCB. I can remove it if it's a problem. But let...
In details: SSH linux side udooer@udooneo:~$ sudo i2cget -y 1 0x77 0xD0 0x55 In the sketch: Wire1.begin(); uint8_t res = read8(0xD0); [...]...
What about the Wire other functions? Should it call Wire1.{beginTransmission/requestFrom/write/send} or...
So, I get sensors data from Arduino side that writes them on Serial and I read them from Linux side. Basically I'm monitoring them from Arduino...
Board: Udoo Neo Full OS: Udoobuntu 2.1.2 + UART6 patch Kernel: Linux udooneo 3.14.56-udooneo-02053-gcf9f3ed-dirty #3 SMP PREEMPT Thu Apr 13...
Hi Krista, Usually you have to do "ssh -X user@ip" in order to use your X with ssh
Just bought this one:...
Hmmm so you didn't find a working one eventually...right? I saw that Udoo has firmware-ralink. We should try with one of these:...
Hi guys, I'm trying to add a Wifi USB dongle in order to make the UDOO Neo a bridge. So I will use UDOO's classic network to connect to a SSID and...
I'm using Elementary OS (based on Ubuntu 13.04). Tell me more how you fixed it. In my opinion it's a wrong UDOO's behaviour...
Let me know if you find a solution :D
I tried to delete the dhcp.leases but it doesn't always work :/
Up. Another very annoying problem Udoo has is that it "overwrites" the laptop route and it stops its connection. I'm not an expert of this...
Up
And this one too.
Hi Guys, I'm wondering if it's possible to have another Serial in Arduino-side, like UART5. At the moment I have a pollution sensor on UART5 RX...
Separate names with a comma.
