Rufus works perfectly and is maintained very well https://github.com/pbatard/rufus/blob/master/ChangeLog.txt It also can make USB disks with...
You selected the wrong board in Arduino IDE menu Tools --> Board (Uno instead of 101).
Also read this topic if you have the troublesome message: Arduino 101 Error: device not responding. https://forum.arduino.cc/index.php?topic=387687
512 GB is about it on 60mm M2 Sata 600. If you do not mind sticking the M2 drive out (with a bracket, link) you can go higher. You could also use...
The installation of the Arduino IDE with the 101 board manager is a delicate procedure including installing a driver. It looks like that is...
Hey guys, have you already checked out LibreELEC for UDOO x86? For more info: https://www.udoo.org/…/Soft…/LibreELEC_with_CEC_support.html
There is now a LibreELEC page on the documentation: https://www.udoo.org/docs-x86/Software_&_OS_Distro/LibreELEC_with_CEC_support.html
@ektor5 Perché non inserire questa risposta sul forum? Ora tutti quelli con lo stesso problema devono contattare l'assistenza clienti .....
You have to see the Udoo X86 as a PC allways connected by USB with the onboard independent Arduino 101 (curie). They practically only share USB...
Normally you use the Arduino part for Real Time reading sensors and controlling actuators, motors etc based on the input of the sensors (I/O). The...
It is a little bit strange that suddenly you cannot upload sketches anymore. Perhaps something is blicking communication? Are you using serial...
Linux has some tools to check the i2c bus. You could use python with smbus library to communicate with your i2c device. Has the manufacturer of...
If you put an extra extender between the 2 acrylic plates it definitely can accommodate an m2 ssd disc (although not nvme!!) and a 2" sata disc....
I believe Kickstarter project is closed and boards to be deleverid in December. Normally there will be a pre-ordering option introduced where...
You can use the standard Command Line interface from Arduino IDE https://github.com/arduino/Arduino/blob/master/build/shared/manpage.adoc and use...
Yes, here you have another example of udoo dual, robot and opencv: https://udoo.hackster.io/fredrik/udoovision-76719c
Oops forgot to add the link to my previous answer: https://www.udoo.org/tutorial/face-recognition-face-tracking-via-opencv-and-udoo/
There is the Udoo Neo with an i.MX6sx and the Udoo Dual or Quad with the i.MX6 Dual or Quad. The last 2 can handle OpenCV without any problems....
Did you read this? https://www.udoo.org/forum/threads/open-cv-on-neo.3126/
If specification says Udoo Neo than you have to use this. I would go far the most simple and low spec USB cam you can get (but supported by...
Separate names with a comma.
