I alrady answered this question on the other thred but to be complete: :-) Edit button has been removed due to spammers who are editing their...
Edit button has been removed due to spammers who are editing their harmless post to spammers. You can only delete your post and write it...
Looks like a common Android error so not specific to the Udoo X86. Did you try any of the fiven solutions here:...
The acrylic case can be extended in height by adding extra spacers. The bottomplate is predrilled holes for mounting an 2,5" HDD...
You should set the Ubuntu device as a bluetooth NAP and let the Udoo Neo connect to that Ubuntu Device. See...
According this page noInterrupts() function is still not supported by Udoo Neo....
2 options: 1. Rewrite the RPI library so they can work with the Udoo X86. I think most are an extra layer on the standard Python smbus library...
The Udoo X86 is a normal PC with build in Arduino 101. I suppose you have the software already available to control your USB relay board. So you...
What happens if you plug in a monitor, do you see a desktop?
Yes it should not be present. You could try the following (used to be a fix for older Arduino IDE and location of the rule scripts could be...
From your first post: If that symbolic link is still there and pointing to the wrong serial port (/dev/ttymxc3) then you also have the kind of...
Did you remove the symbolic link you created to the serial port?
There is some dhcp already on the Udoo Neo for the USB Direct connection, perhaps they are conflicting See also...
That topic is for a Udoo dual/quad and solution will not work. It looks like your installation of Arduino IDE including Arduino 101 board manager...
First: What Udoo board (Neo/X86/Dual/Quad)? As they are all different. Second: As all Udoo boards have an Arduino onboard it is a little bit silly...
As it is a new board and you probably set it up the same way as your other X86 board I would open a support ticket at Udoo as it looks like a...
Looks like it works. Did you try it as superuser root (su)?
Is gpio enabled in your OS? Not all Linux distributions work with gpio What do you see if you do "ls /sys/class/gpio" ? It should show some gpio...
Try this and send a character to the Arduino side with the Arduino IDE serial monitor. Check the examples in the documentation:...
The Neo arduino has 2 serial devices, Serial and Serial0. Serial is connected to the Linux side, Serial0 is connected to pin 0 and 1. You are...
Separate names with a comma.
