If you want to use the camera connector then you need a camera that supports NTSC (720x480) or PAL (720x576) resolutions. As discussed in the...
NTSC camera is discussed in this thread.
For camera connector see 3rd post in this thread.
In the current uboot there is no support for HDMI output. The hdmi driver code needs to be ported to support this feature.
I can't vouch for any official figures, however I did some tests while exploring options for battery powering the Neo from a 5v source....
I can empathize with all who are having problems with the Ardunio side. I don't think the UDOO team really thought how Ardunio could be ported to...
Then a few more gpios like LWGPIO_MUX_PORT4_PIN24_GPIO need to be made available along with the mux pins.
Each Analog pin/Digital pin is multiplexed by a gpio pin as declared in the dts: // Multiplexer pins for GPIO/ADC (J5)...
It should work from the linux side although I never use the 'device tree editor' for alterations instead I manually update the dts files to my...
If you asking for the NEO then you need to build (cross compile) it yourself. I don't think there are instructions specifically for the Neo, the...
I think the fundamental problem is that hardware is getting cheaper to produced, however the software costs aren't factored in to the KS campaigns...
In this thread I posted information about how to get started with M4 development. If your new to Cortex m3/m4 development then you may find this...
I don't think that will work because dts files aren't setup correctly to allow the pins to be reassigned, have you tested it (or reviewed the...
If the dts-overlay already exist then just proceed to the next step.
Unfortunately the dmesg output posted doesn't shown the initial kernel boot and more importantly the output of when the vadc driver is...
The output from that dmesg isn't enough, can you 'pastebin' the full dmesg output (without grep) somewhere.
Blue box would indicate the code is reading the VADC output however there's no valid signal from the camera. This may indicate: 1. The camera is...
The VADC is exposed via V4L2, unfortunately not many people are willing to take the time to understand how it works and what is...
I'm not sure what you are trying to achieve by using the ADV7280 because it has similar features to the on board VADC therefore you don't gain...
Tested the SN65HVD230 , see the other thread to save repeating myself.
Separate names with a comma.
