Okay, that explains that. Just edited the title for the thread, as you described. The final wpa_supplicant.conf file is below with personal...
Ahhh, you are so right. I just retried with the new identity and the Neo came right up, without delay. I can ping off a few off-site URLs. It...
ctrl_interface=/var/run/wpa_supplicant network={ ssid="NetName" key_mgmt=WPA-EAP eap=PEAP identity="name@TheRest"...
Yes, I did remove the phase2 entry as well. Let's see, dmesg produces a significant amount of text so I attached that as a file, the syslog file...
Hi, thanks so far. What I'm seeing is that the board sits there for a while, I gather that while it's trying to connect the WiFi, other network...
Thanks Gorgo, let's see... in the first cases, after rebooting I wasn't able to reconnect using the network but was able to communicate through...
Thanks Gorgo, things almost makes sense, but our WPA network doesn't have a global network password. Rather, the password is per user. According...
Hi Gorgo,I haven't heard of eduroam before so I'll have to dig some to find out what that is. I have seen some vague references to wpa_supplicant,...
I'll be digging to learn more about the iw command. As it stands now though, when the Neo boots it appears to reconnect to its last WiFi...
The University here has two WIFI networks, one connects via WEP and the other with WPA. I can connect with the WEP network, but its a pain, as...
Hi folks, took a short break. To summarize things so far, on the upside it's nice to have the CDC-serial driver in place, so that works regardless...
To install the CDC-Serial driver, follow pretty much the same routine as that for RNDIS. After the "Browse my computer for driver software step,"...
Hi Maurice, in getting X to work, I can again use VNC to access the Neo.
Hi Gorgo, I did have some success. For the record I have Cygwin installed, I'm using Cygwin-X along with that terminal. First I checked to make...
After rebooting the Win7 machine, I'm back where I started. That is, with the RNDIS network enabled I lose ethernet and I can ping and ssh to the...
Thank you for your post. I used ifconfig to identify the RNDIS network adapter name, then made a change to what you posted. This is another step...
After my recent trevails, I noticed that the Win7 machine appeared to have both the ethernet and USB-RNDIS connections active, but the Neo had no...
Hi folks, I tried a few things and got myself into and then out from some trouble. Then I tried one more time, and voila, I can ping the Neo board...
Just tried again and the above repeated. But this time I opened to the device manager and disabled the RNDIS driver, and presto, the machine...
Hello folks, as a newbie I'm getting oriented. Today I received my Udoo Neo Full board. I had used Win32 Disk Imager to burn UdooBuntu 2.1.2 to...
Separate names with a comma.
