Helps if you tell us what the error is :) Chances are you're just missing a necessary library that is already on the Pi but not on the OS image...
Well, the nice thing is that since it boots off the microSD, you can always just get another card, load it up with a different image and swap,...
I wonder if it's the adapted sled slowing it down? Reports on Amazon for this card using a USB microSD adapter claimed 18MB/s vs the 10MB/s I'm...
Ok, these times are for a new Sony 16GB class 10 on Mavericks 10.9.2 (using the internal card reader and an SD adapter on a late 2013 15" MBPro...
Nice approach!
Since there's a new Android image I'll give it a try with both BS=1M and BS=4M on my C10 card and time each. Will post results tonight when I get...
In a nutshell, the drivers for things like the 3D chips weren't initially released as hard float versions, and you usually can't mix the two...
And part of the problem is the desire/need to be able to have access to the GPIO pins so you can wire up circuits and stuff for various projects....
Re: Questions about wifi module and SD card The important pieces of that example code are the ones related to creating the socket connection...
Problem is, it's always easier for people to ask the question than to go read and search for the answer themselves.... I just accept it as part of...
NO, you can't boot off the SATA drive directly. You need to have the SD for UBoot, and then have it configured to look for the root filesystem on...
Hmmm... Interesting... Haven't seen one of these before. I would expect that if you're trying to use it for something like RAID5, it would be ok....
Depends on what you're trying to do....
when you guys did the ROS install, did you do it from the pre-compiled stuff or did you start from the "Install from Source" instructions on the...
Re: UDOO - Sheet metal case Hmmm that's actually an interesting solution - pin header passthrough and fan in 1 (largely skeletal to allow airflow...
I likewise have interested in getting ROS going on the Udoo (as the Rpi is WAY WAY WAY too slow for anything other than a leaf node to interface...
Well, like everything else "it depends".... If it's something designed specifically for the Pi's GPIO it might or might not work since the GPIOs...
Yeah, I need to take some measurements... The biggest issue I see is if I want to do the 15" then I end up with a case that is gigantic compared...
Re: Programming UDOO to receive data serially from Arduino d What Draco said... Then, a quick Google search for "Linux C++ serial port read"...
Re: UDOO - Sheet metal case Maybe rather than "holes" for LVDS + Camera - make them knock outs? That way for those who don't have/use those...
Separate names with a comma.
