There's been some known issues with analog input, caused by the compiler. The Udoo guys are working on it. that MIGHT be the issue here.
Re: can Adafruit Webide install on udoo, using node.js & pyt How the GPIO's are accessed on the UDOO is pretty different than on the BBB or RPi....
There are known issues with the compiling and the Udoo team is working on it. Hang in there guys. They'll get it resolved.
Don't have to put it on the SATA drive... It basically will end up being arranged like this: microSD card - Has Uboot on it SATA drive - has...
No, I think you're confused. Most of those commands are ones you run in the Uboot console. You need to hook up another computer to the UDoo with...
Awesome! glad you got it working! Yeah, you don't need UDoo on the SATA because the boot is still being kicked off by the SD card (which DOES...
Given that there's power for a 2.5" drive I'd forcus on that... What I envision is something just like what you have now, except slightly taller...
I'm wondering if you're overpowering the UDoo's pins then... ALL of the IO pins are expecting 3.3V signals, not 5V.
Very nice! Can I make a suggestion? - Make a modified version that has an additional "layer" so we can put a HD underneath... Should just need...
There have been a couple concepts posted, but nobody is currently selling any case. There is hope that the Udoo folks themselves will have...
WHY are you formatting FAT32??? Just reimage the card using one of the disk images. It will partition and format the card for you when doing the...
Re: this topic will never answered and you probably will ban What are you trying to accomplish? Just get the system to boot up? I don't follow...
Ahhh, you're obviously a kindred soul who believes it isn't a good Halloween unless you get at least 3 children to cry (or wet themselves) :)
Awesome! Good to hear! Alas, you'll need Delba's help on the compiler issue as it was the Udoo guys that put that together. they are aware of...
ariadrianto: Remember that the Udoo is 3.3V on the pins, Arduino Mega is 5V. Make sure you're providing the proper V-in to the DHT22 and that it's...
Actually, that info is old... look at this: boot-2013-boot-from-sata-t706.html
How are you powering it? See: http://playground.arduino.cc/Main/MPU-6050#.UyBg0l7ee3A Specifically this paragraph: GY-521 This sensor board...
They SHOULD.... but that doesn't mean they all will - ie: it is possible that there might be some differences. I've never messed directly with the...
Redempter: Check your screen saver settings?
I assume you have looked at this: http://www.elinux.org/UDOO_boot_from_sata You MUST still keep the microSD card in to begin the boot process,...
Separate names with a comma.
