The Gelid silent 6 just fits although it is a tight fit. Despite officially being a 12v fan it seems to work ok using 5v from the Bolt.
I have received the recent email from UDOO regarding the Bolt Gear. Does anyone know if this is any different to the current Bolt v8 or is it...
It works fine on mine as long as I do not have Hyper-V activated under Windows 10. I see no reason it would not work on other OS as well.
My Bolt was unstable 9n Windows until I disabled the eMMC drive in Windows Device Manager. Ironically it seemed to be more likely to crash if I...
There is no Bios password unless you explicitly set one.
if your fan is one of those with a green dot on the side it might well be worth raiding a support ticket to get it replaced
I have been doing x265 encoding where I run the CPU at close to 100% for hours on end and the temperature still does not get over about 70-75C so...
I used a Gelid Silent 6 fan which JUST fits into the standard case. It seems to run OK at 5V even though it is officially a 12V fan and...
Have you tried disabling the eMMC drive in Windows Device Manager? There have been many reports that this can stop BSOD occurring.
The connectors I got that worked called themselves JST 1.25mm...
. I just used the ones provided (although I turned the springs upside down).
You can buy short 6” leads with the Bolt board connector already fitted (I got 5 for £2.50 on eBay) and I soldered one of these in place of the...
I can confirm that the Bolt and the x86 use the same SATA cables as I have used them on both.
Yes. I also have the ‘v’ variant of the fan (one with the green dot) so I wonder if this was why I saw no obvious reduction in fan noise from...
I found that the first few boots after the BIOS upgrade took MUCH longer than expected (so much so that I initially thought I may have had a...
I have successfully been using a Gelid Silent 6 fan which has the great advantage of (just) fitting in the metal case.
The Bolt DOES seem to support IOMMU in that there is Bios option for enabling it. By default it is set to disabled but i have successfully...
In case anyone is interested I tried the Gelid Silent 6 fan on my Bolt over the weekend. Despite it being rated as a 12V fan it seemed to work...
I have just successfully used a Transcend M.2 SSD 420S with the Bolt. It is only a 2242 form factor but the mounting hole is at the same point...
Did you mean you are waiting for a Kickstarter pledge to be delivered? For those then looking at the posted messages on Kickstarter it looks...
Separate names with a comma.
