You can do it for sure. Just install the appropriate firmware for your dongle and you're good to go. To know which firmware you'll need, plug...
Absolutely yes, you can use the Official 7'' LVDS displays http://shop.udoo.org/other/accessories/ ... touch.html They work straight out of the...
I think the communication beetwen Arduino and IMX6 will not be so crucial... As you said you can improve slightly by reducing running processes...
Yep! Edit file /etc/inittab Change line T0:23:respawn:/sbin/getty -L ttyS0 115200 vt100 to #T0:23:respawn:/sbin/getty -L ttyS0 115200 vt100...
Re: Gstreamer crashes udoo when trying to stream camera modu Take a look here: http://elinux.org/UDOO_Camera_Module UDOO Camera module is set...
Using a loopback device is the only way you can access the camera on /dev/video7. So, just activate the camera driver with UDOO Configuration Tool...
Hi! I always had the idea of building something really similar, a guitar pedal with lcd touch panel... Think I'll make it sooner or later... So,...
Re: Gstreamer crashes udoo when trying to stream camera modu Nope, you tried: gst-launch I suggested: gst-launch-0.10 ;) This is because...
Ok guys we built an image with notxarb's OpenElec build. We added the official U-boot which should solve the resolution issues you guys are...
[img] ;)
Try with gst-launch-0.10 -q mfw_v4lsrc ! x264enc byte-stream=true ! flvmux ! tcpclientsink host=192.168.1.20 port=6666
FOA, thanks to notxarb for his great work. We tried the image and works like a charm, no issues whatsoever. We think that the only issue is with...
Excellent distro. We tried it and discovered why some people cannot use it...
Tip of the day: discovered that connecting a USB audio device on the auxiliary USB connector gives better results with JackD. Connecting to other...
The kernel and U-Boot can be downloaded both as source and binaries, it's really up to you. The Rootfs is the root partition, with programs, files...
Thank you for your feedbacks, they are precious to get what your experience was like and make UDOO better. I honestly agree with most of your...
Dear guys, understand your disappointment about current XBMC\OpenElec status on UDOO. As we promised, after the 1.0 UDOOBuntu Release we started...
We have a 3d printer on our way. As soon as we get it here, we'll try your case and let you know! Thanks so much!
A quick solution could be using a normal USB dongle, attached via the aux USB connector. Or, use a female USB port (with the dongle) and insert...
Mmmm... That could be a permission problem... You could try to add your user to dialout group. I also found this:...
Separate names with a comma.
