I read in the documentation that BIOS 1.02 displays these symptoms. The updated BIOS 1.03 is the apparent solution.
Hello Everyone, I am about to license my x86's for use with Windows 10 PRO. I've seen stores online that advertise keys for less than the...
The 10K resistor seems to work much better. I'll have to test it over a longer period of time to know for certain. Now that it's behaving like...
I am adding code for debouncing the button. You can also add a small capacitor, close to the switch to help with the debounce. Try something...
I'm using a 1K5 for pull-down; I'll try a 10K as that will only help with the trigger voltage sensing!
The code now reads. Neither of these attempts are reliable: void power_interrupt() { /* When the button (connected to the Pin 2) is pressed,...
Okay, I'll give it a try. Thank you. I have Serial.print in the Main loop; I'll try removing that for starters, but I don't believe that will...
is it the interrupt that is failing to do the 5 times pin 9 sequence in 100 ms or is it the Braswell failing to recognize this sequence? I cannot...
Hello All, I'm trying to program my X86 Advanced Plus to wake and sleep via an interrupt using the Arduino 101 interface. I have successfully...
I have a Raspberry Pi 800 x 480 as well as a 1024 x 600 with HDMI input and it works just fine....
I can't recall if the fan is two wire, or three wire? It seems like the sense wire is not making contact to the main board, and therefore the CPU...
I'm confused about this as well. My best guess is that, GPIO's that are designated as 3.3V have compliant trigger levels (logic low and logic...
Perfect, thank you! I was just reading the GPIO section in the Hardware & Accessories link. You saved me some searching and reading!
Good Morning Everyone, I'm currently searching your forum and other sources to learn more about the Arduino101 and UDOO interface. My searches...
I can verify Andrea's specifications as I measured power last evening : - Loading browser, surfing internet, Windows 10 PRO, with USB wireless...
This happened to me as well. Try switching monitors. I had to use an HDMI to DVI adapter in order to use another monitor, but it worked. The...
Separate names with a comma.
