Have you tried installing via synaptic and see if it will install anything new at all. Check the /var/logs and see if you are get errors on the...
Have you checked you have a working internel connection + a dns nameserver and default gateway ?. log into a terminal and try "ping google.co.uk"...
The Xbee`s data lines are not 5 volt torrent , so on normal 5 volt avr arduino you need to fit a voltage divider ( level shifter ) to drop the...
Sounds like a power problem. Try monitoring the 5 and 3.3 volt outputs while it`s booting
The post was in march . I tried making a new sd image , but in the end worked out it was a hardware problem so sent it back under RMA. It was...
The normal way I`ve seen on forums is monitored first post. The people which are posting the spam have no idea about what the forum is about, so...
I was working on the same problem for weeks before I solved it. putting-the-bunny-back-the-box-t1527.html Recompile the kernel , but make the...
Are you sure about that ?
Just look for raspberry pi and the magic mirror !!!!!
The best way is to use the arduino for control , because of it`s advantage of better current handling of the pins plus the imx6 side doesn`t have...
Re: PL-2303 Usb Serial Module Communication Problem Not try to use that serial adapter , but the one i`ve gone doesn`t work too. I think the...
Sorry , replying to your other post on the same subject Yep , the usb is connect to a onboard 4 port hub . 2 usb ports + 1 extra port + usb wifi...
The big advantage of firmata is its universal , so any web site about firmata for the raspberry pi , beaglebone etc will work on the udoo because...
Look at schematics/UDOO_REV_D_schematics.pdf in downloads . Can`t find the second usb port or what it`s used for.
Use firmara / pyfirmara to collect the analogue values and control the pwm pin , and use python for the high level logic and programming .
wow , There is more spam on this forum than at the local supermarket !!!!!
1 / Use a serial cable ( cn6 ) , which should give you a clue , what and a what stage you have the fault . 2 / remake a new sd image and try a...
My project is just to make a dvb-t recorder / streamer which will record at least 2 program at once and stream to my tablet, also act as many...
what I changed it the kernel was :- Device driver >> Multimedia support Then went a little over kill which added about 300k to the kernel . < (...
I use webmin to administer and go to : - system >> boot up - shut down >> lightdm , and tell it not to run on start up.
Separate names with a comma.
