Hi graugans, goog job ! if i close the j27 jumper the board boot on yocto ! First issue, i didn't have a functional screen , not hdmi, not lvds 7...
For information, i have booted to yocto image (from seco). You just need to close J27 jumper to boot from sd ... Qt 5.3.2 work fine (90fps in qt...
Ok, i will check this tomorrow ... For information, in this config your board boot ? Good news, you have your sa62 board ;)
I'm agree with graugans, ensure you source the correct script (this will be a common error !), otherwise, post some screen shot of your Qt conf ?...
Hi graugans, i have build with success the secoA62 layer (full qt5 image), copy it to the sd but already same problem, impossible to boot from the...
Contact Seco ...
Thanks for this precisions !
Can you explain what are the major change with the revB please ?
Nice to see seco on this Forum ! Actually we developed a new app under ubuntu 11 (BSP 4.0), if i understand, if we order news A62 board there are...
Hi stefanpini ! sorry but in my case i never try android on A62, can't help more ... Did you contact Seco about your problem ?
Hi graugans, very nice job ;) if i understand, yocto 2.0 turn on A62 Now ? Can you precise more how to use it please ? Can we juste make a repo...
Hi i didn't remember to have this error, normally now they have all the patch to build qtwebengine ! did you make a bitbake -c cleanall...
My local.conf My bblayers.conf
Hi, i didn't remember to have this issue but my local.conf (and bblayers) are different from the git --> i had some modules to have a full qt5...
Thank's for your solution !
Yes, Seco provide a guide to do this (i never tried it for the moment ...) You can ask seco (if you have an answer !) to give you the instruction...
Thanks, i will take a look. Otherwise, on the device tree you make for neo, have you enabled ecspi2 or 3 ? If no, can you explain how to enable...
Andrea, in my case since Seco website ...
Hi i'm looking the device tree of neo because i would like to use ECSPI_2 or ECSPI_3 (A9 side). I saw on imx6sx-udoo-neo-externalpins.dtsi this :...
Do you have the debug kit with your card (serial card), you need to connect your serial debug to connector J31 and open a serial term on your host...
Separate names with a comma.
