As quick test you can add 1360x768 to the list of valid cea modes in mxc_edid.c
Unfortunately as I'm developing on/supporting a number of different imx6 boards, I don't always have time to put images together. May be someone...
It reverts to 640x480 because there was no EDID values detected, some HDMI to VGA adapters require additional power to make them work correcty....
Updated original post with links to newer experimental rootfs with 3.10.17 BSP support + gstreamer 1.0 plugins + webcam interfacing.
dmesg output shows that uboot didn't pass the kernel the correct resolution, most likely your boot.scr changes weren't picked up.
Unfortunately it won't work with a 'HDMI to DVI' adapter, there we some kernel patches for 'HDMI-DVI' support but these gave inconsisent results....
Most likely this is a overscan issue, I faced the same issue with one my TVs using the UDOO. Normally the TV should have a menu option to...
I have updated the original post with compilation/deployment instructions. I suggest you also spend sometime getting up to speed with...
The gpio are owned by the process who creates them, which in this case it must be the board code in the kernel (root) hence the issue.
Looks like bossac-hfp now contains similar code to the erase/reset instructions I posted further up this page for the SAM. What happens if you run...
Hi, unfortunately I don't have a UDOO at hand to test/diagnose so can't give you an answer. I posted some instructions for installing Arduino IDE...
i2c is configured in the dts, therefore providing you have a kernel driver available then it should work. Not sure on the spi side, haven't...
Updated blogwith build instructions if you want to give it a test drive.
Short description and video of Wayland/Weston running on the UDOO.
Separate names with a comma.
