dtsi file is here so no need to decompile it. FYI the best way to get monitor timings is to read the EDID for your monitor using...
As of today on the NEO you only have the following allocated to the M4 side (your missing the fact that some I/O is dedicated to the A9 if you...
I think it will be an uphill struggle to use the on board Gyro for flight stabilization as the sampling rates aren't particularly fast and the...
Currently (this may change in the future), if you want to change resolution then you need to edit the dts which has the monitor timing for hdmi...
2 points to note, although I can't verify the Neo datasheet. 1. GC420 is a 2D core (not 3D), if you look at the Vivante description, therefore...
If your planning to get this or a similar display working on the udoo then will you need to look at making changes to the kernel to correctly...
imx6sx has a GC400T see here (under multimedia) and the Vivante spec . Bear in mind the harder you try to push the GPU there is the small chance...
I'm surprised this question hasn't been asked earlier because the serial console is the quickest way to solve many of the problems other are...
The adafruit LCD doesn't support a valid HDMI resolution (1280x800) so it would only work with a DVI input source. It may be possible to make that...
It's difficult to compare the M4 to existing M4 solutions because of the heterogeneous architecture. The imx6sx M4 can either run from 1. Flash...
The Vivante GC400 is a very low spec GPU intended for IOT and is rated for 720p@60 FPS. Therefore any resolution above this may reduce performance...
Should be a Molex 87832-1420 which is 14pin 2mm, as I posted here . Although I wouldn't recommend it, however if your feeling brave you can solder...
I think you need a Molex 87832-1420 it is a 14pin 2mm header, sadly they didn't provide one as part of the package which is a shame as the M4...
You need to be aware that the M4 in my opinion is bettered described as a 'slave' core which has a number of ramifications, such as 1. sharing of...
Officially there's no Open GL support (so sofware), only Open GL ES is accelerated on the i.mx6. glxinfo report the error because you need to...
Updated rootfs to 3.10.17 GA release, see original post for link. You need to create a new kernel with my udoo patches from my beta branch.
Thats because the MIPI interface is not configured in the dts file, if you know what your doing then you can try configuring it to the dts file....
Not at the moment. For later kernel releases dts file(s) are required as they replace the inconsistency of creating "board specific files" for...
You are setting the resolution for fb1 NOT fb0 in your uboot script: video=mxcfb1:dev=hdmi,800x600M@60,bpp=32 It should be:...
Separate names with a comma.
