Please consult the support forums of the Arduino Libraries you are using. Or examine the libraries yourself to see if they use the same interrupts...
Damned, missed this one :-)
The schematics of the udoo dual or quad you are referring to, can be downloaded from the following page (after selecting dual/quad)...
The procedure is written here: https://www.udoo.org/docs-x86/Arduino_101_(Intel_Curie)/Braswell_Power_Management_From_Arduino_101.html
Yellow means there is power.... Did you press the very small power button (not the arduino master reset)? As a last resort you could try to boot...
Connect it to a hdmi monitor (TV) and a keyboard (not wireless). Press the ESC button continuesly intill you see the UEFI firmware application...
Good news, glad I could help.
And already fully backed on the first day!
That instruction will not work. Instead you can activate UART6 (/dev/ttymxc5) on the linux side with the Device tree editor and use basically...
2 of the udoo boards have motion sensors, the x86, all versions, and the Neo Extended and Full. You can find all the information you need in the...
More information about UART6 can be found here https://www.udoo.org/docs-neo/Hardware_&_Accessories/UART_serial_ports.html
I now understand what you are trying to do: connect the programming wires of the sonoff to the Arduino side and from Linux side have it shown as a...
The arduino part of a Neo is software wise more or less compatible with a regular Arduino Uno. But hardware wise they are completely different and...
I think you better use the instructions for Android, it also includes a section about the kernel....
What problems/compile errors do you have? Where in the procedure to compile Android 6 for Quad does the problem.show?
Dont put it off :-) The slow power up is a feature of the Arduino 101: https://www.arduino.cc/en/Guide/Arduino101. It will also depend on your...
The BIOS/UEFI option is explained in the documentation link I gave you. The Arduino Curie issue is not solved yet and I doubt it ever will seeing...
The curie has a bug when connected to USB: Leaving the Arduino 101 connected to the PC (as for an embedded installation or as in the UDOO X86...
But only if you want to send serial data from Arduino to Braswell. Or reprogram the sketch so that it starts doing what it should do (eg reading...
They are probably millicelsius so you have to divide with 1000 to get celsius....
Separate names with a comma.
