OpenEmbedded/Yocto for UDOO Boards

Thank's but now i have thie error :

osboxes@osboxes:~/udoo-community-bsp/build$ MACHINE=udooneo bitbake udoo-image-full-cmdline
ERROR: Unable to parse /home/osboxes/udoo-community-bsp/sources/poky/bitbake/lib/bb/parse/parse_py/ConfHandler.py
Traceback (most recent call last):
File "/home/osboxes/udoo-community-bsp/sources/poky/bitbake/lib/bb/parse/parse_py/ConfHandler.py", line 188, in feeder(lineno=20, s='BBLAYERS = " ${BSPDIR}/sources/poky/meta ${BSPDIR}/sources/poky/meta-yocto ${BSPDIR}/sources/meta-openembedded/meta-oe ${BSPDIR}/sources/meta-openembedded/meta-multimedia ${BSPDIR}/sources/meta-openembedded/meta-python ${BSPDIR}/sources/meta-openembedded/meta-networking ${BSPDIR}/sources/meta-fsl-arm ${BSPDIR}/sources/meta-fsl-arm-extra ${BSPDIR}/sources/meta-udoo ${BSPDIR}/sources/meta-fsl-demos ', fn='/home/osboxes/udoo-community-bsp/build/conf/bblayers.conf', statements=[<bb.parse.ast.DataNode object at 0x28f3e90>, <bb.parse.ast.DataNode object at 0x28f3ed0>, <bb.parse.ast.DataNode object at 0x28f3f10>, <bb.parse.ast.DataNode object at 0x28f3f50>]):

> raise ParseError("unparsed line: '%s'" % s, fn, lineno);

ParseError: ParseError at /home/osboxes/udoo-community-bsp/build/conf/bblayers.conf:20: unparsed line: 'BBLAYERS = " ${BSPDIR}/sources/poky/meta ${BSPDIR}/sources/poky/meta-yocto ${BSPDIR}/sources/meta-openembedded/meta-oe ${BSPDIR}/sources/meta-openembedded/meta-multimedia ${BSPDIR}/sources/meta-openembedded/meta-python ${BSPDIR}/sources/meta-openembedded/meta-networking ${BSPDIR}/sources/meta-fsl-arm ${BSPDIR}/sources/meta-fsl-arm-extra ${BSPDIR}/sources/meta-udoo ${BSPDIR}/sources/meta-fsl-demos '

 

No problem, i'm doing this, this evening

 

Dear @graugans,
thanks for what you're doing from the UDOO Team - and also from the Community I assume
Would you mind hand us a precompiled image so we can put it into the Downloads section?

 

my bblayer https://gist.github.com/modjo22/360921d52a5fafd8f78f

 

Hi Graugans, i make another yocto build on another machine (the first test i made was under a virtual machine with ubuntu 12.04). My second test is under kubuntu 15.10 (no virtual, 64 bit coreI5, 8Gb of ram) and for the moment it compil (just one warning), see under :

modjo@Linux-corei5:/media/modjo/39a50e93-4c35-4598-a6b8-9627986411e5/yocto/seco/udoo-community-bsp/build$ MACHINE=udooneo bitbake udoo-image-full-cmdline
WARNING: Unable to get checksum for linux-toradex SRC_URI entry defconfig: file could not be found########################################################################################## | ETA: 00:00:00
Parsing recipes: 100% |######################################################################################################################################################################| Time: 00:02:08
Parsing of 1910 .bb files complete (0 cached, 1910 parsed). 2456 targets, 169 skipped, 0 masked, 0 errors.
NOTE: Resolving any missing task queue dependencies
NOTE: multiple providers are available for jpeg-native (jpeg-native, libjpeg-turbo-native)
NOTE: consider defining a PREFERRED_PROVIDER entry to match jpeg-native

Build Configuration:
BB_VERSION = "1.28.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Ubuntu-15.10"
TARGET_SYS = "arm-poky-linux-gnueabi"
MACHINE = "udooneo"
DISTRO = "poky"
DISTRO_VERSION = "2.0.1"
TUNE_FEATURES = "arm armv7a vfp thumb neon callconvention-hard cortexa9"
TARGET_FPU = "vfp-neon"
meta
meta-yocto = "HEAD:dd0ba9ea4a11ab15348d4fe3574e4b28784db82f"
meta-oe
meta-multimedia
meta-python
meta-networking = "HEAD:ad6133a2e95f4b83b6b3ea413598e2cd5fb3fd90"
meta-fsl-arm = "HEAD:35b8b9bd9863de208ab60e33b55f10ee43e2619b"
meta-fsl-arm-extra = "HEAD:95f6f731517817ae2f8b379da43ab3376005e5d4"
meta-udoo = "HEAD:9ae3d7a99621238ca1424b0e33540bbfe8560eb3"
meta-fsl-demos = "HEAD:2231e946e7a94d096394f2b2477e8184c9bbde7b"

NOTE: Preparing RunQueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
Currently 4 running tasks (44 of 3332):

I let you know the progress ...

 

Hi, let my pc work all the night and this morning 1 error

Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_copy_aclocals
| DEBUG: Python function autotools_copy_aclocals finished
| DEBUG: Executing shell function do_configure
|
| ERROR: User requested feature sdl
| configure was not able to find it.
| Install SDL devel
|
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at /media/modjo/39a50e93-4c35-4598-a6b8-9627986411e5/yocto/seco/udoo-community-bsp/build/tmp/work/x86_64-linux/qemu-native/2.4.0-r1/temp/log.do_configure.2056)

To correct this i install
sudo apt-get install libsdl1.2-dev libsdl-image1.2-dev libsdl-mixer1.2-dev libsdl-ttf2.0-dev

with no success, after i downloaded the source of sdl 2 and compil it
modjo@Linux-corei5:/media/modjo/39a50e93-4c35-4598-a6b8-9627986411e5/yocto/seco/udoo-community-bsp$ sdl2-config --version
2.0.4
modjo@Linux-corei5:/media/modjo/39a50e93-4c35-4598-a6b8-9627986411e5/yocto/seco/udoo-community-bsp$ sdl-config --version
1.2.15

Do you an idea to resolve this ?

 

Work's like a charm thanks !!! build is running (task 1319 of 3332) ...

 

Hi graugans, udooneo image builded with success on kubuntu 15.10. write the image to the sdcard and boot it :



under just some test i made on it under ssh :
modjo@Linux-corei5:/media/modjo/39a50e93-4c35-4598-a6b8-9627986411e5/yocto/seco/udoo-community-bsp/build/tmp/deploy/images/udooneo$ ssh root@192.168.1.18
root@udooneo:~# ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:c0:08:8c:0f:79
inet addr:192.168.1.18 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::2c0:8ff:fe8c:f79/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:173 errors:0 dropped:8 overruns:0 frame:0
TX packets:61 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:54300 (53.0 KiB) TX bytes:10565 (10.3 KiB)

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:34 errors:0 dropped:0 overruns:0 frame:0
TX packets:34 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2380 (2.3 KiB) TX bytes:2380 (2.3 KiB)

wlan0 Link encap:Ethernet HWaddr de:ad:be:ef:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

root@udooneo:~# uname -a
Linux udooneo 3.14.56_1.0.0_ga-udooboard+g757d7c7 #1 SMP PREEMPT Tue Jan 19 19:04:14 CET 2016 armv7l GNU/Linux
root@udooneo:~# hciconfig hci0 up
root@udooneo:~# hciconfig
hci0: Type: BR/EDR Bus: UART
BD Address: 5C:31:3E5:6E:3F ACL MTU: 1021:6 SCO MTU: 180:4
UP RUNNING
RX bytes:1176 acl:0 sco:0 events:62 errors:0
TX bytes:804 acl:0 sco:0 commands:62 errors:0

root@udooneo:~# hcitool lescan
LE Scan ...
5C:31:3E:C2:61:C3 (unknown)
5C:31:3E:C2:61:C3 Geonaute BLE HRM
5C:31:3E:C2:61:C3 (unknown)
5C:31:3E:C2:61:C3 Geonaute BLE HRM
^Croot@udooneo:~# iw wlan0 scan
command failed: Network is down (-100)
root@udooneo:~# ifconfig wlan0 up
root@udooneo:~# iw wlan0 scan
BSS c8:d3:a3:15:65:5a(on wlan0)
TSF: 515105812775 usec (5d, 23:05:05)
freq: 2437
beacon interval: 100 TUs
capability: ESS ShortSlotTime APSD (0x0c01)
signal: -43.00 dBm
last seen: 160 ms ago
Information elements from Probe Response frame:
SSID: wifi-bureau
Supported rates: 1.0* 2.0* 5.5* 11.0* 9.0 18.0 36.0 54.0
DS Parameter set: channel 6
ERP: Barker_Preamble_Mode
Extended supported rates: 6.0 12.0 24.0 48.0
HT capabilities:
Capabilities: 0x116e
HT20/HT40
SM Power Save disabled
RX HT20 SGI
RX HT40 SGI
RX STBC 1-stream
Max AMSDU length: 3839 bytes
DSSS/CCK HT40
Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
Minimum RX AMPDU time spacing: 4 usec (0x05)
HT RX MCS rate indexes supported: 0-7, 32
HT TX MCS rate indexes are undefined
HT operation:
* primary channel: 6
* secondary channel offset: below
* STA channel width: any
* RIFS: 0
* HT protection: 20 MHz
* non-GF present: 1
* OBSS non-GF present: 0
* dual beacon: 0
* dual CTS protection: 0
* STBC beacon: 0
* L-SIG TXOP Prot: 0
* PCO active: 0
* PCO phase: 0
Secondary Channel Offset: no secondary (0)
WMM: * Parameter version 1
* u-APSD
* BE: CW 15-1023, AIFSN 3
* BK: CW 15-1023, AIFSN 7
* VI: CW 7-15, AIFSN 2, TXOP 3008 usec
* VO: CW 3-7, AIFSN 2, TXOP 1504 usec
BSS Load:
* station count: 1
* channel utilisation: 5/255
* available admission capacity: 31250 [*32us]
Overlapping BSS scan params:
* passive dwell: 20 TUs
* active dwell: 10 TUs
* channel width trigger scan interval: 300 s
* scan passive total per channel: 200 TUs
* scan active total per channel: 20 TUs
* BSS width channel transition delay factor: 5
* OBSS Scan Activity Threshold: 0.25 %
Extended capabilities: HT Information Exchange Supported
Country: GB Environment: Indoor/Outdoor
Channels [1 - 13] @ 16 dBm
WPS: * Version: 1.0
* Wi-Fi Protected Setup State: 2 (Configured)
* Selected Registrar: 0x0
* Response Type: 3 (AP)
* UUID: d7bc3e58-7e95-a936-98aa-c8d3a315655b
* Manufacturer: D-Link
* Model: DIR-600
* Model Number: DIR-600
* Serial Number: 00000000
* Primary Device Type: 6-0050f204-1
* Device name: DIR-600
* Config methods: PBC
root@udooneo:~# echo 1 > /sys/class/misc/FreescaleAccelerometer/enable
root@udooneo:~# cat /sys/class/misc/FreescaleAccelerometer/data
1068,-336,-16480
root@udooneo:~# echo 1 > /sys/class/misc/FreescaleGyroscope/enable
root@udooneo:~# /sys/class/misc/FreescaleGyroscope/data
-sh: /sys/class/misc/FreescaleGyroscope/data: Permission denied
root@udooneo:~# cat /sys/class/misc/FreescaleGyroscope/data
-96,-45,2
root@udooneo:~# exit
logout

All work fine (like bluettooth LE, gyro ...) except my logitec keyboard (wireless). Do you make a test for the arduino side (m4 micro) ?
Congratulation for your very good job, time and explanation to do it

Next step Qt5 !!!

 

Graugans, could you guive me some help to build an image with qt5.51 ? To do this, in my source i add the meta qt5 :

git clone -b jethro https://github.com/meta-qt5/meta-qt5.git

after that i edit the bblayer.conf to add qt5 (and ruby), this is my file :

LCONF_VERSION = "6"

BBPATH = "${TOPDIR}"
BSPDIR := "${@os.path.abspath(os.path.dirname(d.getVar('FILE', True)) + '/../..')}"

BBFILES ?= ""
BBLAYERS = " \
${BSPDIR}/sources/poky/meta \
${BSPDIR}/sources/poky/meta-yocto \
\
${BSPDIR}/sources/meta-openembedded/meta-oe \
${BSPDIR}/sources/meta-openembedded/meta-multimedia \
${BSPDIR}/sources/meta-openembedded/meta-python \
${BSPDIR}/sources/meta-openembedded/meta-networking \
${BSPDIR}/sources/meta-openembedded/meta-ruby \
\
${BSPDIR}/sources/meta-fsl-arm \
${BSPDIR}/sources/meta-fsl-arm-extra \
${BSPDIR}/sources/meta-udoo \
${BSPDIR}/sources/meta-fsl-demos \
##meta qt5
${BSPDIR}/sources/meta-openembedded \
${BSPDIR}/sources/meta-qt5 \
"
Do you think i need to add something ?
I just want to add qt5.5.1 (full) to your image, to do this can i launch :

MACHINE=udooneo bitbake fsl-image-multimedia-full

edit :
do you think i need to add gstreamer, vivante header and all qt modules on local.conf like in this wiki :
http://wiki.wandboard.org/index.php/Building_Qt5_using_yocto_on_Wandboard

 

Thanks Christian!

 

Whaou, you are the best !!!

i did this :
$ PATH=${PATH}:~/bin
$ repo sync -->this add your file
$ MACHINE=udooneo source ./setup-environment build
$ MACHINE=udooneo bitbake udoo-image-qt5

--> build is running (task 1103 of 5480) ... I let you know the result

For information my bblayers.conf, i added the lines in blue.
LCONF_VERSION = "6"

BBPATH = "${TOPDIR}"
BSPDIR := "${@os.path.abspath(os.path.dirname(d.getVar('FILE', True)) + '/../..')}"

BBFILES ?= ""
BBLAYERS = " \
${BSPDIR}/sources/poky/meta \
${BSPDIR}/sources/poky/meta-yocto \
\
${BSPDIR}/sources/meta-openembedded/meta-oe \
${BSPDIR}/sources/meta-openembedded/meta-multimedia \
${BSPDIR}/sources/meta-openembedded/meta-python \
${BSPDIR}/sources/meta-openembedded/meta-networking \
${BSPDIR}/sources/meta-openembedded/meta-ruby \
\
${BSPDIR}/sources/meta-fsl-arm \
${BSPDIR}/sources/meta-fsl-arm-extra \
${BSPDIR}/sources/meta-udoo \
${BSPDIR}/sources/meta-fsl-demos \
${BSPDIR}/sources/meta-qt5 \
"